1. Power key / menu key
A function: switch function
In the off state, long press the power button [] for 2 seconds to turn the machine power, the machine start working automatically.
In the boot mode, press and hold the [Power] button for 2 seconds and the unit automatically save video files, and user settings and shut down.
Function II: menu function
Turned in a mode corresponding to tap the power button [] to enter the corresponding mode menu, and tap [Power] key to enter the system setup menu
2. OK button / mode button
A function: enable / disable recording function
In the video mode, press [Enter] to start recording again short press [Enter] to stop recording.
Function II: camera key
In camera mode, press [Enter] once to take a picture.
Function three: file playback key
In the file explorer mode, press [Enter] to play the video.
Function four: Enter
In the standby state recording mode / camera mode / playback mode; tap [Menu] key to enter the menu mode, press the up key [up / down] keys to navigate, short press [Enter] to determine.
Function Five: mode switching function
In the boot state, long press the [OK] button, the machine will be in the video, take pictures, switch between playback mode.
3. On key
A function: page up function
In the menu settings and playback modes for the scroll function.
Function two: Turn off recording Shortcuts
In video mode, short press button to turn off the recording function, the screen changes to the upper left of the microphone icon ban, said it had closed recording function. Press again to turn the recording, the recording icon is open.
4. The next key
A function: Page Down Function
In the menu settings and playback mode for the next page function.
Function II: Emergency lock key
In the video mode, if you want to protect the current video will not be covered, the emergency recording Short press [] key to activate the emergency locking lock, then lock the file icon appears at the top left of the screen, then the current time of the accident is saved as a whole a special image, the image will not be overwritten.
Installation and removal TF card
1, in the correct direction TF card into the TF card slot, TF card until it is secured in the slot so far.
2, remove the TF card, gently pressing TF card, TF card can be removed after the pop-up.
Note:
1 Please note that TF card insertion direction, if the reverse insertion might cause damage to the machine and TF card
2, when you TF card into the machine, the machine that is will this TF card as the default storage device, the data of the original TF card could not be read
3. If TF card is not compatible with the machine, please re-plug it back once or Zhang TF card and try again.
4, supports up to 32G (64G card must be formatted before use after the unit above).
5, requires the use of more high-speed card CLASS 6