Specifications

Diesel Injector Seat Cutter Set
- 19x15 / 17x17 /19x17mm FLAT reamer
- 21x17 / 17x17mm ANGLED reamer
- T handle
- Pilot post

Diesel Injector Seat Cutter Set, Auto tool, Automotive Tool.

 

Features/Specifications :

 

 

• This kit has been specially designed for the clean and re-cutting of injector seats on modern common rail diesel engines.
• The kit includes 5 seat cutting reamers for BOSCH, DELPHI and universal application along with a special angled reamer for IVECO / FIAT applications.
• Identify injector “Blow-By” exists.
• Gain access to the injectors and remove them.
• Select required reamer onto pilot post and tighten internal hex screw.
• Place assembled cutter into injector recess.
• Using the T bar and socket supplied apply only a small amount of pressure whilst turning the cutter in a clockwise direction only.
• Use a small amount of light lubricant whilst performing the cut to reduce chattering and help give a flat cut.
• Do not over cut the seat only remove enough metal to form a good seat.
• Thoroughly clean the seat and remove all swarf.
• Contents:
  • Dia. 19mm x 15mm FLAT reamer for universal injector.
  • Dia. 17mm x 17mm FLAT reamer for DELPHI / BOSCH injectors (BMW / PSA / RENAULT / FORD).
  • Dia. 19mm x 17mm FLAT reamer for BOSCH injectors (MERCEDES CDI).
  • Dia. 21mm x 17mm ANGLED reamer for FIAT / IVECO.
  • Dia. 17mm x 17mm ANGLED reamer for FIAT / IVECO and FORD.
  • T handle x 1
  • Pilot post x 1