Specifications

Drinking water treatment equipment
1)Capcity: 0.5T/H--20T/H
2)Durable, beautiful
3)Security filter: for PP filter

1>purified drinking water treatment equipment

0.5T/H pure water system with the output pure water be fresh and tasty,and reach the national standards

 

Model: KYRO-500L/H

 

1)Capcity: 0.5T/H

 

2). Pre-filter:

 

1.Quartz sand filter:diameter:  φ250×1450MM

2.Active carbon filter:diameter:  φ250×1450MM

3.Softener:diameter:   φ250×1450MM(can be add acoording to your need)

4.security filter: for PP filter

 

3).RO system:

 

a.Ro membrane:UPL-4040

mbrane module: stainless steel

c.high pressure pump:NanFang pump,

d.pipes:U-PVC/stainless steel

e:Ro system dimension:250*100*280CM

Suitable places underground water,tap water,pure water quality reach drinkable water standard

 

2>Advantage:

1. Automatically and manually wash RO membrane; 

2. Manually wash RO memebrane with chemicals on machine; 

3. Machine automatically stops when high water level of purified water, and runs when low level;

4. Multi-stage pumps protect the machine when lack of water; 

5. Large eletric current, creepage protect and so on;

 

3>Water application:

1. Suitable water source: Tap water, surface well water

2. Inlet water TDS limit: Below 2000PPM(for other water source, please provide us water report for detailed analysis for choosing RO membrane)

3. Water recovery rate: 70%

4. RO membrane salt rejection rate: 99%

5. Treatment water TDS range: 30-50ppm(bottled water standard)

 

4>Installation:

1. Raw water pump-provide the pressure to silica sandfilter/active carbon filter

2. Silica sand filter-get rid of turbidity, suspended mater, organic matter, colloid and so on.

3. Active carbon filter-remove the color, free chloride, organic matter, harmful matter and so on.

4. Micron filter-prevent any deposition of large Particles, most of the bacteria, and viruses into the RO membrane, the accuracy is 5 um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.

5. High pressure pump-provide the high pressure to RO membrane(at least 2.0Mpa)