Specifications
Analog panel meter:1.Measure single phase power factor
2.DC4~20mA output
3.Programmable
Analog Panel Meter
Feature
YD8000 series digital panel meters adopt modular design. Customers may order models in various dimensions according to the application. The meters with PIC chip have strong resistance to interferences, and the performance/cost ratio is high.
Installation,Material & Isolation
Installation modeMounting installation,wring at the back
Material of outer caseNon-flammable
Isolation Between power supply/input/output
Performance
Measurement: Single Phase Power Factor
Measuring range: 0-360°
Accuracy: ≤±0.02 PF
Input Range: Voltage: AC 90-380V
Current: AC 0-5A
Display range: - 1- 0 -1
Measuring speed: About 1.5 times/s
Frequency: 40-60Hz
Polarity indication: Capacitive loading
Power supply: AC220V±20,50/60Hz
Power consumption: ≤2VA
Working frequency withstands voltage: Between power supply/input/output: ≥AC2kV/min·1mA
Insulation resistance: ≥100MΩ
Operating Notice
n The operating environment allows no electric dust or gases that corrodes metal or destroys insulation.
n Operating conditions: temp.: -10-50, RH 10-95The altitude is less than 2500m.
n User shall connect the measured signal source and auxiliary power supply correctly according to the plate on the outer case of the meter.
n No extra setting is needed. Only connect the meter to the measured signal source and the auxiliary power supply.
