Name: Mobile High Capacity Jaw Crusher with ISO in Coal and Gold to Angola
Brand: LIPU
Availability: InStock

Product Details

Features of High Capacity Jaw Crusher :

1.Symmetrical deep crushing chamber is adopted to maximize range of feed size,capacity and crushing ratio.

2.Three-dimensional software is adopted to optimize crusher parameters and parameter proportion,and reduce equipment self-weigth,so capacity is increased more than 30%.

3.Bearing seat is designed integrally,so manufacturing dificulty is greatly reduced,and bearing life is increased.

4.There is a thick replaceable plate on the top of moving jaw to prevent moving jaw from being impacted.

5.Wedge is adopted to replace traditional gasket,so the adjustment is much easier and more reliable.Discharging size can be adjusted into and size of the adjustment range.

Application of High Capacity Jaw Crusher :

PEV Series jaw crusherare based on years' experience and technology development.The continuous improvement and refinement have made them the preferred jaw crusher for professionals and our customers.They can meet most crushing requirements in primary and secondray crushing,and the largest compression resistance of the material is 320MPa.This seriess are widely used in stone mining,metallurgical,construction,smelting,hydraulic and chemical industries,etc.

Working principle of High Capacity Jaw Crusher :

The motor transmits power through belt,drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft.The angle between toggle plate and moving jaw plate increases when moving jaw moves.So the moving jaw moves towards the fixed jaw.The stuff will be crushed in this process.The angle between toggle plate and moving jaw decreases when moving jaw moves down,the moving jaw moves leaves fixed jaw by pulling rod and spring,the final crushed stuff will be discharged from the outlet.

We have various of Jaw Crusher Manufacturer .In order to give you a responsible quotation, you can inform us the following information:

What's the material you are going to deal with?
What's the granularity of the material?
What's the granularity of the final products are you going to achive?
What's the producing capacity you are going to achieve?

Our engineers will suggest you the most suitable one for you according to your information.

Model	MAX INput size(mm)	Outlet adjusting range(mm)	Capacity (t)	Power (kw)	Weight (t)
PEV250×1000	210	25-50	20-50	37	6.1
PEV250×1200	210	25-50	25-65	45	6.5
PEV300×1300	250	20-90	30-105	75	10.3
PEV400×600	380	40-80	20-65	30	7.02
PEV500×750	450	50-150	45-107	55	10
PEV600×900	500	75-180	100-200	75	15.2
PEV750×1100	630	80-190	140-320	110	23.1
PEV860×1100	750	100-200	200-500	132	24.6
PEV900×1200	750	100-220	220-600	132-160	42.5