Product Details

Product Description

CG1-100H Dual Torch Straight Line cutting machine

“CG1-100H” gas cutting machine (two torches) is designed well and beautiful. We do technical innovations and optimizations for it based on “CG1-30”. This machine adopts new material, which improves the serviceability, durability heat-insulating property and practicability. Distributor adopts integral flame adjuster. You only need one time of adjusting preheat oxygen and cutting oxygen. In the next cutting, when you open the valve, the nature of flame doesn’t change.“Double-torch” machine can load two torches and cut at the same time. Also, you can use them to cut “V” or “X” groove.

Specifications

1.Weight	21 kilograms
Accessory	7.8 kilograms
2. Machine dimension	435×210×240mm
3. Speed control	Silicon control
4. Power source	AC 220V±10% 50HZ
5. Cutting speed	50~750/mm/min
6. Cutting thickness	5-100mm
7.Groove angle	0-45 degrees
8.Diameteral of cutting circle	ø200-ø2000mm
9.Tip	G02(acetylene),G03(propane)
10.Motor	DC 110V 50HZ 30W 4200r/min

Contents of package

1. Body	1 set
2.Torch unit assemblage	1 set
3. Moving unit assemblage	1 set (including left-right, up-down moving unit assemblage and gear rack)
4. Tip	6 pcs
5. Heavy punch	1 set
6. Power wire	1 pc
7. Manuel and certificate of qualification	1 pc each
8. Gas-in connector /pressure cat	1 set
9. Ball-pane screw M4	2 pcs
Standard accessory
1.Cutting circle unit assemblage	1 set
nvex guide rail	2 pcs 1.8m/pc or grooved guide rail 1pc1.8m)

Diagram for this straight line cutting machine:

1. Hoses:Oxygen hose, Preheating oxygen hose and cutting oxygen hose

2. Cross moving hand wheel: To adjust horizontal position of torch.

3. Cross moving gear rack

4. Vertical adjusting hand wheel of torch

5. Tip

6. Clutch hand knob: "STOP" is declutch; "START" is combine.

7. Thermal baffle: To prevent heat to diffuse into the inner of machine.

8. Motor. Changeover switch: To control the direction of machine, "stop" position is in the middle.

9. Fuel gas two-port valve: To adjust the flow.

10. Preheating oxygen two-port valve: To adjust the flow.

11. Cutting oxygen two-port valve: To adjust the flow.

12. Heavy punch

13. Gas distributor: It has three blocks, "open", "preheating", "cutting"

14. Fuse

15. Main machine

16. Electric outlet

17. Adjusting speed knob: It can increase the cutting speed along "0" toward "10" clockwise, and decrease the speed along "10" toward "0" anti-clockwise.

18. Universal wheel