Product Details

Product Photo

Product Description

mineral flotation separator Function

There are many kinds of non-metallic mineral flotation machine,XCF type pneumatic mechanical agitation flotation machine is one of them. The main characteristics of the flotation machine is using the vertical circulation of pulp and the low pressure air pressed into by blower to improve the flotation efficiency .This is a kind of advanced processing equipment,and applicable to non-metallic mineral sorting,such as phosphorus, silicon, sulfur.

XCF mineral flotation separator Structure

The main components are: rotor, air distributor, the stator, tub, shaft, bearing and support, compressed air pipe network.

mineral flotation separator Principle

When the impeller rotates ,impeller blade suction pulp.the slurry in the tank is sucked from around the bottom of the impeller bottom into the blade between,At the same time ,low pressure air given by blower to enter between the impeller blades by distributor. After the thoroughly mixture of the pulp and the air between the impeller blades,they are discharged through the impeller peripheral under the impeller.Discharge of pulp and air mixture with blade discharge on pulp, around the impeller by installation of the stator current and directed into the groove of the main body in pulp, mineralized bubbles rise to the surface of a trough and forming foam layer, pulp groove part of return under the impeller blade in circulation, the other part by circulate on partition slot hole into the next slot choose don't again. the discharged pulp and the air misture together with the pulp discharged by the above impeller is rectified and orientated by the stator installed around the impeller and then into the main pulp in the tank,mineralization bubbles rise to the surface of the tank to form a foam layer.Part of the slurry in the tank return to the blades under the impeller to cycle,other part enter into the next tank through the hole on the well between the tanks to separate again.

XCF Nonmetallic Mineral Flotation Machine Technical Parameters

The Manufacturing Process of mineral flotation separator

Flotation Machine Delivery

Worksite of mineral flotation separator

Company Information

Our Services

Pre-sale:Enthusiastic
We offer you the early planing of the project,the best process flow design,choose the best appropriate equipment model to design products according to your special needs.

Sale: Integrity
All productds have to pass strict inspection with the drawings and process flow according to the contract before
they go out.We assigned the technicians to the producing spot to provide installation guide, testing and training.

After-sale:Considerate
To establish good business relationship,we adopt periodical visit to the users.We could give you the definite reply during 24 hours when the users meet some problems in the producing process.

FAQ

Q:Payment
A:30% by TT as deposit on signing the contract, 70% by as final payment of balance after the client’s satisfactory inspection of the equipment prior to the goods leaving the factory.

Q: What about Warranty? what will we do if the machine is broken down

A: The warranty period for all of structural and mechanical equipment is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.

Q: What should we need to do for if we want to get a best quotation
A: Hi, if you want us recommend a suitable type for you ,please let us know as follows:
1).the capacity (tons per hour )
2).feed size
3).raw materials

Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with proposal chart for complete production lines,spot inspection and operator traning according to your demands and the conditions of applied spot , we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on for rotary washer for sand washing.

Q:Delivery time
A:Standard delivery time for stationary crusher plant is 30 days from receipt of deposit,the mobile crusher plant is 45 days.