Specifications

Rubber Paste Binder HF-1050

This product is our company newly developed high performance emulsion which can meet or exceed the National standard. It’s the self-crossling copolymer emulsion of butyl acrylate,acrylonitrile and other functional monomers at the high temperature with some auxiliaries.It can reach the Europe and Japan environment standard.

1,Specification

• Appearance:milky paste
• Solid Content:50±1%
• PH:6-7
• Ion:Anion
• Viscosity:(25°C,4#rotor,60rpm)5-10Pa.s

2,Features

• good washing fastness,without cracking out when naturally washing for 5 hours,better fastness can be get after baking
• super soft,not sticky
• the higher solid content,the better covering
• formaldehyde free,APEO free,don’t contain heavy metals and can meet Europe and Japan environment standard 
• both quickly-dry and slow-dry products can be offered to meet the customers’ requirement,apply to the machine printing
• perfect chemical and mechanical stability,can be compatible with many pigment printing ingredients,not clog

3,Application

• applied to screen printing,table printing,flat printing
• used to the producing of pigment rubber paste(white/clear paste)

4,Usage

  10-30%,can be baked at 130°C for 3 minutes after natural drying.

5,Package and Transportation

• package:PE Drum with plastic bag inside,50kg
• transportation:by buyer or seller
• storage:at the temperature of -5-40°C,in a dry and ventilated warehouse for more than 6 months

6,Note

• the paste resin which has been added into fixing agent and other agent should be use out within 24 hours
• baking at high temperature or adding into some fixing agent can enhance the washing fastness, but may affect the hand feeling and elasticity
• in some cases,if printing on the cotton,fixing agent is no longer needed,but should make a test sample before producing

The above information is confirmed by our engineer,for the practical application,pleas refer to the note before using.