Name: Muanual printing paste
Brand: FUHUA
Availability: InStock

Product Details

Product Description

Item Name	Manual Printing Paste PT-818,828,838
Main composition	Acrylic Polymer,titanium (for white paste)
Appearance	Milky white paste
PH value	7.0-8.0
Ion	Anion
Viscosity(25°C,#4 rotor,6rpm)	40000-50000 cps
Dosage	white printing, color printing
white paste	90%-100%, 20%-30%
clear paste	10%-0%, 77%-62%
pigment dispersion	3%-8%
total	100%, 100%
Brief Introduction	The manual printing rubber paste is made by the acrylate monomers (self cross linking under the radiation of Cobalt 60 γ) and import titanium dioxide. It’s used to the rubber paste printing on cotton and blended fabric. It is very white, good elasticity,high coverage, soft hand feeling,good fastness and can be washed under 60℃ water for 120 minutes without falling off. Both the white and Clear paste are eco-friendly.

Printing procudure

Printing	100-120 mesh board,generally for cotton fabric print 2 times each time print 3 times, for high elastic fabric should print clear paste 2 times as bottom paste,then mix the white and clear with required pigment color,print 2 times once again;
Heat processing	The paste can dry naturally with 24 hours or cured for 2-3 minutes at 130℃ temperature,for heat pressing under 130℃ then 10-15 seconds is enough;
Drying speed	The paste drying speed is suitable,good mechanical and chemical stability,well compatible with many pigment dispersion;
Time Reminder	The paste should be used out within 24 hours after adding the agent,the recommend time for using is 12 hours after mixing.