Electrical instrument DC0-50A ammeter,Mini ammeter,LED digital ammeter
USD $1 - $100 /Piece
Min.Order:100 Pieces
Cixi Intec Import And Export Co., Ltd.
Electrical instrument DC0-10A digital current Meters LED ameter
Led digital ammeter,Mini ammeter,Electrical instrument ammeter DC0-10A digital,
DC0-10A Electrical instrument current mete,Mini current meter,Led digital current meter
Electrical instrument DC0-5A digital current Meters LED ameter
Electrical instrument DC0-1A digital current Meters LED ameter
Electrical instrument DC 60~500V Voltage Meters LED voltmeter
Electrical instrument DC0-50A ammeter,Mini ammeter,LED digital ammeter
1, Measuring range of this ammeter is DC0-50A.
2, The ammeter must match 50A/75mV shunt to be used, but the price does not include shunts.
3, You must use an external power supply, the power supply voltage DC4.5-28V.
4 Special Note: In order to be able to take power measurement circuit ammeter work performed, the meter is designed to power and the input common ground that the sampling line (thick) black wire is the ground wire, and the other thick pick a meter of the amplification circuit input. Therefore, the sampling line (thick line) and shunt connected with it is totally unacceptable positive, must be connected to the electrical appliances after (ie, the negative electrical appliances). Otherwise, it will instantly burn ammeter, causing no display or display ---. Please confirm before buy, the two meter thick and they are connected with the shunt must be connected between the two negative! Please refer to the specific connection wiring diagram on the page. Our prominent position has been explained on the page.
5 Meter high input impedance, high requirements for power supply ripple and susceptible to interference. Please do not use bad power converter (especially DC / DC switching power supply). Do not put ammeter and shunt near interference sources (such as electric car chargers), and the ammeter shunt between the lead is not too long, if you must be long, then please use shielded cable.
6, The meter is not suitable for use in electric vehicles. 1, the electric car for outdoor use, easy to damp meter water cause damage; 2 meter connection between the shunt, the signal is very weak, the largest only a few dozen millivolts. Such a small signal, are particularly vulnerable to interference. Coupled with the electric car, this connection will be very long, fading and interference will seriously affect the ammeter work. It is not recommended to be used in electric vehicles ammeter.
Specification :
Outside size: | 48*29*36mm | measuring range : | DC0-50A |
Open hole size: | 46x27mm | min input: | DC 0A |
Wire length: | 20cm | max input: | DC 50A |
N.W: | 26g | tolerance: | 1%(+/-1) |
G.W: | 30g | display mode: | 0.56″LED Nixie tub |
Supply voltage: | DC4.5-28V | color: | red ,green ,blue |
current: | ≤ 20mA | Update rate: | 500mS/each |
Working temperature: | -10°C~65°C |
As a professional electronic components manufacturer, we have more than ten years production & service experience. In order to speed up customers development, we builded long terms firm cooperation with over 500 suitable & competitive manufacturer which are from Wenzhou, Dongguan, Shenzhen, Kunshan and so on, strict QC and effective communications is our daily duty; and which bring in stable goods supply and excellent services for our customers. We run the Quality Management systerms according to the ISO9001 also certificated by RoHS, SGS, UL, CE,etc.
Over the past ten years, INTEC has built a global sales network, and established long-term strategic partnership with clients in USA, European, South Africa, Pakistan, Ski Lanka, Malaysia, etc. Constantly seeking new opportunitied to partner with organizations that are looking to expand into new markets. These companies appreciate the advantages of partnering with INTEC.
If you are interested in any of our products, please feel free to visit our website or contact us directly for more information. We also welcome any customer design (OEM & ODM) or sample.
We look forward you!
Q1:How to guarantee the Quality of Industrial Parts?
A1: We have the integrated system for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.
Q2:What's the Advantage of Your Parts for Industry Products?
A2:The advantage of our products is the competitive prices, fast delivery and high quality. Our employees are responsible-oriented, friendly-oriented,and dilient-oriented. Our products are featured by strict tolerance, smooth finish and long service time
Q3:what are our machining equipmengts?
A3:Our machining equipments include CNC milling machines, CNC turning machines, stamping machines,hobbing machines, automatic lathe machines, tapping machines, grinding machines, screw machines, cutting machines and so on.
Q4:How Long is the Delivery for Your Industrial Part?
A4:Generally speaking, it will take us 15 working days for machining parts and 25 working days for stamping parts products. But we will shorten our lead time as soon as possible according to customers' demands.