Main Products: Tile leveling system ,tile spacer ,voltage regulator ,Moulds ,cable clip moulds
hollow tile spacer cross
USD $0.01 - $0.05 /Bag
Min.Order:100 Bags
Quick Details View All >
Yueqing Dingyi Plastic Co., Ltd.
Business Type: Manufacturer,Trading Company
Wenzhou Zhejiang ChinaMain Products: Tile leveling system ,tile spacer ,voltage regulator ,Moulds ,cable clip mouldsProduct Details
Tile spacer
1.Material :Fresh material or recylce material(as customers' requirement)
2.Type :standard type and with handle type,T type ,soft material material
3.Application:Made of PE Holds tile securely in place for quick and accurate installation Precision
molded, not extruded, for strength and stability
4.Size :1.0,1.5,2.0,2.5,3.0,4.0,5.0,6.0,8.0 and 10.0mm
What you'll need;-
- Tile Spacers
- Tiles
- Adhesive
- Latex Gloves
- Notch Trowel
- Adhesive Spreader (Optional)
- Grout Float
- Hydro Cleaning Sponge
- Mixing Bucket (For mixing adhesive)
1.) Using a Bright Ideas Notch Trowel, apply a bed of adhesive over an approximate area equivalent to four tiles.
2.) Fix the first tile squarely into position and place a 1mm tile spacer at each corner.
3.) Using a twisting action position the next tile alongside the first tile and place a 1mm spacer at each of the corners.
4.) Repeat points 1 to 3 for all subsequent tiles applied.
5.) After all tiles have been applied to the surface, proceed to grout over all the tiles using a Bright Ideas Grout Float, making sure to leave spacers in their fixed positions.
6.) Allow the grout time to set before cleaning away any excess grout with a Bright Ideas Hydro Cleaning Sponge.
Laying the Tile: Step 1
Mix enough adhesive to cover the size of a section you can lay within its working time (the amount of time it takes for the thinset mortar to set up and become unworkable). Work from the bottom up, spreading the adhesive evenly and combing it with the notched edge of the trowel. Start at the bottom, and using a batten, press the tile into the mortar with a slight twist.
Laying the Tile: Step 2
Continue laying the pattern of your choice, using spacers if your tile is not lugged. Note the placement and position of the spacers. Setting the spacers flush with the surface of the tile will make them difficult to remove. Inserting them in the manner shown above makes removal an easy task. When the field tile is set, cut and install the edge tiles.
Keeping the Tiles On the Wall: Step 3
If you're not using a coved base and your layout results in cut tiles at the floor, tack a level 1x or 2x batten along the plane on which your first full tiles will be laid. The batten will keep the rows in place and prevent the tiles from sliding down the wall. Even with a coved base or a batten and spacers, you may have to take precautions to keep the tile on the wall while the adhesive cures.
Drive nails partway into the wall at least every third of each tile's length and tape the tiles with masking tape. If your layout calls for a coved tile base, install it first, leveling it with nylon wedges. Then tile up the wall
1. Moulds design : We accept any new moulds design ,if you have any good idea ,just feel free to contact me ,we will do moulds custom for you !
2.Agent wanted :we are looking for agent around the world , if you want to be sole agent of our product in your area ? we will support you all the way
3.Professional work team : most of our workers with more than 5 years working experience ,we are fimilar with moulds design ,product design ,production ,packing ,shipment .
1.What the MOQ ? Normaly ,the MOQ is 1000bags .small quantity is also acceptable.
Or just feel free to contact me by email :
2.What's the delivery time? in one week (based on MOQ)
3.How about the shiping ?We ship it by sea or air as your client required .Or we prvide door to door service if needed
4.What's the payment ? TT ,PAYPAL,WESTERN UNION ,L/C
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln