Specifications
Paint Coating Thickness Gauge F/NF Probes with 0~50mil
Brief Description
This Coating Thickness Meter is an ideal gauge for automotive and painting applications. It uses magnetic induction and eddy current principle to measure thickness of magnetic and non-magnetic surface and detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous, F) or an insulating coating on a non-magnetic conductive substrate (non-ferrous, NF).
The meter is equipped with built-in NF (NFe) probe used in procedure turbulence current test and F (Fe) that uses magnet inductive. It carries out fast and accurate results with wide measuring range of 0 ~ 1250 μm(0 ~ 50 mil). You can choose the measure the thickness by Single or Continuous Mode. Moreover, you can connect to the computer to collect and retrieve the Measured Data through optional software and cables.
Features
- The F probes measure the thickness of non-magnetic materials such as paint, plastic porcelain enamel, copper, zinc, aluminum, chrome on magnetic materials such as iron, nickel etc. It is often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile and paper
- The NF probes measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder applied to aluminum, brass and non-magnetic stainless steel etc
- Wide measuring range (0 ~ 1250 μm / 0 ~ 50 mil) and high resolution
- Digital display with no guessing errors
- Two Measurement Mode: Single and Continuous
- Switchable between mils and microns
- Automatic or Manual Power off
- Automatic Substrate Recognition
- Automatic Calibration (when no other metal substrate nears the probe sensor upon switching on)
- Meets the standards of both ISO2178 and ISO2360. Suitable for the laboratory and for use in harsh field conditions
- Conform with CE Standard
- Optional Software CD and USB Cables
Specifications
- LCD display: 4 digits, 10mm LCD
- Coating Thickness Range: 0 ~ 1250 μm / 0 ~ 50 mil
- Resolution: 0.1 μm (0 ~ 99.9 μm); 1 μm (over 100 μm)
- Accuracy: ± 1 ~ 3% n or 2.5 μm or 0.1 mil (whichever is greater)
- Power supply: 4 x 1.5V AAA (UM-4) batteries (not included)
- Operation Temperature: 0 ~ 50 °C (32 ~ 122 °F)
- Operation Humidity: below 80%
- Item Size: approx. 126 (L) x 65 (W) x 27 (D) mm (4.96 x 2.56 x 1.06 inch)
- Item Weight: approx. 81 g (2.86 oz) (batteries excluded)
One Set Included
- 1 x Coating Thickness Gauge (main unit)
- 4 x Calibration foils
- 1 x Aluminum substrate
- 1 x Iron substrate
- 1 x Instruction Manual
- Optional Software CD and USB Cables
- 1 x Storage Case with handle
- Standard Factory Package