Specifications

2.4" LCD Wireless Inspection Camera with 1M / 2M Flexible Tube

Brief Description 

 

This new designed Wireless Inspection Camera allows you to inspect hard-to-reach areas. You can use this device to look into tight spots and beam back real-time video for monitoring.  

 

Compared with traditional inspection camera, the 2.4" Color LCD receiver can be detached from the main unit for remote viewing. The image orientation function on receiver allows you to adjust the viewing orientation of image. In addition, the receiver has built-in rechargeable Li-battery with long useful life.  

 

The camera head is equipped with 4pcs of adjustable LED lights for night vision and inspection in dark areas. The mini 9 mmcamera is waterproof so that you can inspect 25 cm (10 inchs) under water (when assembled properly). The horizontal viewing angle of the camera is 45°. 

 

The long flexible 1 m (3.3 feets) cable allows you to extend the vision to point of discovery. Optional extension cable (1 m / 3.3 feets) allows you to further extend the vision of inspection point. The tool set also comes with accessory hook, magnet and mini mirror to speed up to identify the problem. 

 

This inspection camera is ideal for HVAC inspection, automotive inspection, cable routing, automotive / boat / aircraft inspection.

 

 

Features 

• Assist for inspection in hard to reach areas
• Wireless and wired mode for convenient viewing
• 10 m unobstructed effective range between camera and LCD receiver
• High resolution 2.4" Color TFT LCD receiver
• Adjustable brightness and contrast on screen
• Built-in rechargeable Li-battery for wireless receiver
• Image orientation of flip over and 180° rotation can be adjusted
• Hand-held design and light weight so that you can inspect everywhere you want
• 4pcs of adjustable LED lights for night vision
• Mini 9 mm camera head
• IP67 waterproof camera head to view maximum 25 cm (10 inchs) under water (when assembled properly)
• Twist and lock attachments
• Glare-free close-ups and wide range field of view
• Long flexible cable (1 m / 3.3 feets)
• Comfort grip housing
• Video output to TV (AV cable not included)
• Optional extension cable (1 m / 3.3 feets)

 

Specifications 

 

Camera 

Imaging Sensor	CMOS
Total Pixels	640 x 480 (PAL) ; 640 x 480 (NTSC)
Horizontal View Angle	45 degree
Transmission Frequency	2468 MHz
Minimum Illumination	0 Lux
Modulation Type	FM (Frequency Modulation)
Bandwidth	18 MHz
Unobstructed Effective Range	10 m
Waterproof Capacity	IP67 (only for imager head)
Power Supply	4 x AA Alkaline Batteries (not included)
Camera Diameter	9 mm (0.35 inch)
Dimensions	approx. 186 (W) x 41 (D) x 145 (H) mm (7.32' x 1.61' x 5.71' inch) (flexible tube excluded)
Weight	approx. 173 g (0.381 lb)

 

Receiver 

LCD Screen Type	2.36 inch (5.9 cm) Color TFT LCD
Effective Pixels	480 x 240
Video System	PAL / NTSC
Transmission Frequency	2468 MHz
Exterior Supply Voltage	DC 8 ~ 36 V
Consumption Current (Maximum)	490 mA
Video Output Level	0.9 ~ 1.3 V at 75 ohm
Receiving Sensitivity	≤ -85 dBm
Operating Temperature	-10 ~ 50 °C (14 ~ 122 °F)
Operating Humidity (Max)	15 ~ 85% R.H.
Dimensions	99 (L) x 69 (W) x 29 (D) mm (3.93' x 2.72' x 1.14' inch)
Weight	approx. 137.5 g (0.303 lb)

  

 

One Set Included 

• 1 x inspection camera handle
• 1 x 1 m of flexible tube with 9 mm camera head
• 1 x LCD receiver
• 1 x magnet tip
• 1 x hook tip
• 1 x mirror tip
• 2 x rubber rings
• 1 x adapter cable
• 1 x power adapter (EU / UK / AU / US plug with DC 100 ~ 240 V)
• Optional extension cable (1 m / 3.3 feets)
• 1 x instruction manual
• Packed with retail color factory box