12v mini air compressor tyre inflator air pump fro portable car jump starter
USD $5.00 - $6.00 /Piece
Min.Order:50 Pieces
Shenzhen Lipower Technology Co., Ltd.
360 degree Touch Sensor Table Lamp 256 Color Changing Smart Bedside Lamp Dimmable Warm White Light
Gradient Colorful LED Table Lamps Touch Sensor Dimmable Warm White and Color Changing Lamp
Warm White /Multicolored Dimmable Table Lamp with Touch Sensor
Warm Light Mode Colorful Night Light Bedside Lamp with Smart Touch Control
White Color Touch Sensitive Dimmable RGB LED Bedside Table Lamp
Name | Car air compressor |
Voltage | 12V |
Max pressure | 80 Psi |
Maximum current | 4A |
Unloaded current | <2.5A |
Inflating speed | Less than 10 minutes to inflate tire from 0 to 30 PSI |
Working temperatures | -10℃~60℃ |
Pressure gauge display | Analogue-select reading in PSI, BAR&KPA |
Lighting | 1xLED for illumination |
Dimensions | 10.8x9.5x4.7mm |
Package content: | 1xCar air compressor 1xNozzle adapters 1xSports needle 1xUse Manual |
Product feature:
1.High pressure makes a fast and sufficient tolerance.
2.A dedicated and mini shape with LED light, convenient to carry.
3.Travel essentials, used for 12v mini car jump stareter together emergency anytime and anywhere.
4.Safety-protective design and durable.
5.Working at normal temperature.
Operation Instruction:
Please Note: This air Compressor only works with this battery.DO NOT try it with any other battery or power suppliers.When you finish,turn off air compressor before unplug the cable from this battery.
1)Connect power cord to designated battery socket.
2)Remove the dust cap from tire value and keep in secure location while not in use.
3)Carefully remove the air house from the side of the compressor and screw the value connector in place.Make sure the value is correctly connected,and not over tightened.
4)Press the 'ON' switch and the compressor will automatically start to inflate the tire.
5)Periodically pause the compressor to allow a steady tire pressure reading to be taken.
6)Once the correct tyre pressure has been reached,switch off the unit,disconnect it from the tire value,and place the dust cap back on.
Using the Adaptors
1)Choose the compatible adaptor and screw it into the value connector.
2)Press the "ON" switch and the compressor will automatically start to inflate the tire.
3)Periodically pause the compressor to allow a steady tire pressure reading to be taken.