Main Products: Polyimide film ,Polyimide tape ,PET tape ,teflon coated fabric ,teflon tape
Double Coated Tissue Tape
USD $15 - $18 /Square Meter
Min.Order:100 Square Meters
Quick Details View All >
Shenzhen Runsea Electronics Co., Ltd.
Business Type: Manufacturer
Shenzhen Guangdong ChinaMain Products: Polyimide film ,Polyimide tape ,PET tape ,teflon coated fabric ,teflon tapeProduct Details
Thermal Conducting Tape with double side adhesive suitable for LED Light Bars & LED Tube Lights applications
Double Coated Tissue Tape
thermal and electrical tape
Technical Data Sheet:
| Double Coated Tissue Tape | |||||||||
| Technical Data | |||||||||
| Product description: Double Coated Tissue Tape for dimensional stability | |||||||||
| and improved handling with ease of die cutting and laminating,The high | |||||||||
| adhesion adhesive proveds excellent adhesion to a variety of surfaces. | |||||||||
| Faceside Adhesive Type/Thickness:Acrylate/0.075mm | |||||||||
| Backside Adhesive Type/Thickness:Acrylate/0.045mm | |||||||||
| Liner Color,Type,Print | White,120gsm PCK, | ||||||||
| Liner Caliper: 0.12mm | |||||||||
| Carrier Type: Tissue | |||||||||
| Tape Color: Translucent/Black | |||||||||
| Note1:Faceside adhesive is on the interior of the roll,exposed when unwound. | |||||||||
| Note2:Backside adhesive is on the exterior of the roll,exposed when liner is removed. | |||||||||
| Typical Physical Properties and Performance Characteristics | |||||||||
| Note:The following technical information and data should be considered representative or | |||||||||
| typical only and should not be used for specification purposes. | |||||||||
| 180 degree peel adhesion ASTM D3330,2 mil PET backing | |||||||||
| Adhesion to Stainless steel N/100mm | |||||||||
| 30 minute RT | 120 | ||||||||
| 72 hours RT 140 | 125 | ||||||||
| Adhesion to PC | |||||||||
| 30 minute RT | 120 | ||||||||
| 72 hours RT 140 | 125 | ||||||||
| Adhesion to PP | |||||||||
| 30 minute RT | 95 | ||||||||
| 72 hours RT 140 | 100 | ||||||||
| Shear Strength--ASTM D3654 | |||||||||
| 1000 grams at 72°F(22°C) 5000 minutes | |||||||||
| Relative solvent resistance Medium | |||||||||
| UV Resistance Medium | |||||||||
| Relative High Temperature | |||||||||
| Operating Ranges: | |||||||||
| Long Term (days,weeks) 70°C | |||||||||
| ShortTerm (minutes,hours) 120°C | |||||||||
| Shelf Life of tape in Roll Form 24 months from date of | |||||||||
| manufacture when stored in | |||||||||
| original cartons at (21°C) | |||||||||
| and 50% relative humidity. | |||||||||
| Application Bond strength is dependent upon the amount of adhesive-to-surface | |||||||||
| Techniques Contact developed.Firm application pressure helps develop better adhesive | |||||||||
| contact and improved bond strength. | |||||||||
| To obtain optimum adhesion,the bonding surfaces must be clean, | |||||||||
| dry and well unified.Some typical surface cleaning solvents are isopropyl | |||||||||
| alcohol or heptane. | |||||||||
| Note:Carefully read and follow the manufacturer's precautions and directions for | |||||||||
| use when working with solvents. | |||||||||
| Ideal tape application temperature range is 70°F to 100°F(21°C to 38°C).Initial | |||||||||
| tape application to surfaces at temperatures below 50°F(10°C) is not recommended | |||||||||
| because the adhesive becomes too firm to adhere readily.However,once properly | |||||||||
| applied,low temperature holding is generally satisfactory. | |||||||||
| General | All tapes have a tissue carrier,which can add dimensional stability to | ||||||||
| Information | foams and other substrates.The carrier also provides easier handling during | ||||||||
| slitting and die-cutting. | |||||||||
| Features Adhesive is a medium-firm acrylic adhesive system featuring both high | |||||||||
| initial adhesion and good high temperature holding power. | |||||||||
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln