Open Core Current Sensor Test AC Probe
USD $50 - $150 /Piece
Min.Order:1 Piece
Beijing GFUVE Electronics Co., Ltd.
Open Core Current Sensor Test AC Probe
Suitable for 200 A cable online measurement.
Holding wire diameter:Φ20mm
Dimension:48mm×186mm×27mm
Load capacity:≤4Ω
Installation: clamp type
Output mode: lead output
Primary current | Secondary current | Compensation turns | Precision |
30A | 30mA | No | Class 0.2% |
80A | 20mA | No | Class 0.2% |
80A | 20mA | 400 circle | Class 0.2% |
100A | 20mA | No | Class 0.1%, 0.2% |
100A | 50mA | No | Class 0.1%, 0.2% |
100A | 100mA | No | Class 0.2% |
200A | 50mA | No | Class 0.1%, 0.2% |
200A | 100mA | No | Class 0.1%, 0.2% |
200A | 200mA | No | Class 0.2% |
Ratio | 1000: 1 or 2000:1 , customized |
Nominal input current | 200 A |
Max. Cont. Input current | 240A |
Accuracy | 0.1 %,0.2% |
Over voltage category | CAT III 600 V |
Output signal | 200mA AC at nominal input current |
Frequency range | 40 Hz-2000 Hz |
Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
Temperature range | -20 °C to +55 °C |
Output | 2.5 meter cable with D01 connector |
Max. voltage not insulated conductors | 600 V |
Max. jaw opening | 20 mm |
Standard | EN 61010-1 |
Dimensions | 48mm x 186mm x 27mm |
Weight | 300 g |
Layout