Portable mini solar system for home use with LED lamps CE&ROHS Approved

Overview:

The main features and characteristic are listed below

• High efficiency solar panel with High Lumen LED bulb to get full use of solar energy.
• Three LED output interface prolong lifetime of LED.
• Built-in high quality Lithium battery.
• USB Discharging Current≤500MA
• Complete accessories, simple to install and use...

Important Safety Information

n         This product is not water-proof, prohibit installation outdoor, wet or in high humid condition.

n         Please keep the environment ventilation, away from heating element .

n         Please full charged battery in the first time using. Please turn off the power switch if do not use for a long time. Please insure full charge the battery each three months.

n         Prohibit accessing solar panels or LED bulb which is unknown specification or over scope the product capacity.

n         When the solar panel collecting dust too much, please promptly removed, or it can reduce the efficiency of electricity generating from solar panel.

Installation and Using Instruction

1.Select M4 screw which screw cap diameter less than 7mm, fixed the battery case on the wall or other flat surface.

2.Installing solar panel outdoor and  direactly under sunshine.

3.Plug in the solar panel into Solar symbol interface, if the sun is full at this time the Red LED  indicator will be bright, when the battery is full charged, the LED indicator will be green.

4.Hang on the LED bulb in the room, plug in the connector to DC output with three BULB symbol. Turn on the switch of battery case, the green power indicator will be bright, then turn on the switch of cable, the LED could be lighting at this time.

5.The USB interface could charge mobiles.

Common Fault and Handling

1.The charging indicator is not bright, please check the connection of solar panel at correct interface, the solar panel position under sunshine or not.

2.No output from loading port:

   The LED bulb plug in corresponding interface

   The switch of battery case or switch of cable is turn on

   Battery low, please full charged battery then to use.

Technical data: