MIC-8-8-3 mineral water plant cost 1000-2000BPH (based on 500ml)
MIC-8-8-3 washing filling capping one unit machine
Main material stainless steel 304 which is suitable for bottle size from 300ml to 1.5 Liter
It is an automatic washing, filling and capping three in one machine.
PLC of this machine is adopted OMRON brand made in Japan.
All electrical parts are adopted Siemens brand, proximity switches adopt AUTHORNIC brand.
Technical parameter
Technical parameter | |
Washing heads | 8 |
Filling heads | 8 |
Capping heads | 3 |
Production capacity | 1000-2000bph at 500ml bottle |
Filling material | water |
Total power | 4.23KW |
Conveyor form | air conveyor |
Bottle application | plastic PET |
Volume of bottle | from 250ml to 2L |
Diameter of bottle body | Φ50mm—Φ100mm |
Height | 150mm-320mm |
Maximum of cap | Φ25-Φ40mm |
Lid application | plastic |
Adjustable form | transducer |
Volume of bottle | 330ml-1.5L |
Power of lid unscramble | 0.37KW |
Weight | 2.5T |
External dimensions | 2320*1550*2500 mm |
Sales After Service:
1,Guaranty: One Year
2,One set of consumable accessories will be provided with the machine.
3,Before delivery, we will adjust the machine to fit for your product.
4,And our most experienced engineers is assigned to give consulting service, and always available for dispatching abroad.
5,All spare parts are always available for delivery.
6,Manual is in English.
Installation/ Training:
1,The installation can be provided by the MIC company. It must be after shipment and machine has arrived and factory must be ready equipped with all necessary requirements
before booking installation with MIC company.
2,Our engineers will come to the site for the complete and final installation. During the installation session, a one day training course will be provided to the customer to the
customer for operation and maintenance procedure.
3,The purchase at US$80/person/day plus all local transportation, accommodation, air tickets (round trip). Day charges include travel days.
4,Special offer that we can also provide our Sales as translator to your site help the installation and Training. Only to provide the local transportation, accommodation,
air tickets (round trip) for Sales will be fine.
For water treatment plant price water treatment plant with price question:
First of all, before we operate mineral water bottle filling machine, to clearly understand the instructions clearly mineral water bottle filling machine, first read through the instructions again, adjust and use the familiar mineral water bottle filling machine, the operating time must be in strict accordance with the instructions to mineral water bottle filling machine instructions, pay attention to details of the problem , certainly the details determine success or failure .
Secondly, in accordance with the instructions on the machine for regular repair and maintenance of the mineral water bottle filling machine fuselage Oil it , so mineral water bottle filling machine body as far as possible to protect the reservoir , so that the air can be isolated to avoid wine machine rusty , well protected mineral water bottle filling machine body, and this is a way to extend the life of the 3 in1 bottling machine .
Once again, we have to pay attention to hot stand -sealing cloth for cleaning, not retained foreign body in the above , to ensure clean beverage filling machine try to avoid the amount of material for a long time into the mouth of the left cause corrosion .
Fourth, we should always check the machine to see contacts at various parts of the machine is good, important to ensure safe use of electricity, no electricity properly to prevent harm .
Fifth, if found faulty , we have to turn off the power , when necessary, by pressing the emergency stop button , and then deflated lift cover, and then close the voltage , check the reason
Thank you for choosing MIC Company.