Product Details

Product Description

MIC- 500L cosmetic cream making machine jam making machine tomato sauce making machine vacuum homgenzier mixer with ce

INTRODUCTION

Vacuum emulsifying machine consists of vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system(oil tank and water tank optional). It is the most suitable equipment to produce high-grade skin care creams and other cream products.

Body Material:

Inner wall: stainless steel 316

Jacket and outer layer: stainless steel 304

Both inner and outer are polished and handled by special light treatment.

Material: Inner wall is made by 304 stainless steel, jacket and outer layer are made by 304 stainless steel, inner and outer are polished, the surface handled by special light treatment.

Heating system: interlayer electric heating power 8KW, the outer layer covers by asbestos to insulate heat, reducing heat lost and avoiding scalding employees.

Mixing system: both toil tank and water tank assemble disperser of 0.75KW, to make the water and oil heated more quickly and evenly.

100L oil and water pot:

Homogenizer 520L

PN	520L vacuum emulsifying mixer
Capacity	Design volume:650L, working capacity:520L
Kettle Cover	Liquid(particle)inlet, sunk material inlet, air inlet with filter, inspect light and sight glass, 2 PCS CIP drencher head, vacuum port, pressure meter(1 to -0.1 bar), pressure clamp
Mixing pot	Material		Inner layer: SUS316L thickness: 6mm
			Middle layer: SUS304 thickness: 5mm
			Outside layer: SUS304 thickness:3mm
	configuration		Bottom material exhaust, size: DN50/32
			Temp. sensor (0-199℃)
			Electrical heating: 8kw, cooling water inlet
Stirring system	Homogenizer	1.Material: SUS316L; standard homogenizer 2. Power: 11kw/380/50Hz; RPM:2800R/Min
	Stirring scrap and middle stirring	Material: SUS316L,Scrap material: PTFE
		1. Stirring scrap and middle stirring use the same motor 2,Power:4kw/380V/50Hz;RPM:0~45r/min(Frequency control) 3. Stirring scrap and middle stirring rotating the opposite direction
		Safety: 1. During stirring, the cover cannot open, 2. Cover lift cannot stirring.
Vacuum system	1. Vacuum pump: water recycle, power 3kw/380V/50Hz 2. With pressure sensor (during vacuum condition, hydraulic cannot open)
Heating method	Jacket steam heating
Exhaust method	Hydraulic doom and bottom exhaust or positive pressure exhaust material
Pressure	Pressure in the pot during working: -0.090 Mpa; Jacket working pressure:0.2 Mpa
Control box	SUS304 , 1.2mm thickness
Dimension	2700mm×1350mm×3230~4700mm (after lifting size)
	Shelf is SS304
Commissioning	Our factory will send people for commissioning
Spare parts	One year spare parts and tools
Guarantee	One year
Using life	More than 15 years
Water tank	Volume 500L , material SUS316L inner tank diameter: 800mm Inner wall thickness: 6MM, Jacket material: SUS304, Jacket diameter: 900mm, Jacket wall thickness: 5MM Outer layer material: SUS304, Outer tank diameter: 3MM Mixing motor power: 1.1Kw, Mixing speed: 960 Rpm Electrical heating power: 18Kw

Machine detail

Packaging & Shipping

Our Services

Terms & Conditions:

Payment: T/T 30% in advance, balance paid before shipment, video inspection or person inspection before shipment

Delivery: 25-30 days after receiving the deposit.

Packing: wooden case

Validity: 1year

Sales After Service:

Guaranty: One Year

One set of consumable accessories will be provided with the machine.

Before delivery, we will adjust the machine to fit for your product.

Any question, you can mail/call us at any time. And our most experienced engineers is assigned to give consulting service, and always available for dispatching abroad.

All spare parts are always available for delivery.

Manual is in English.

Installation/ Training:

The installation can be provided by the MIC Company. It must be after shipment and machine has arrived and factory must be ready equipped with all necessary requirements before booking installation with MIC Company. Our engineers will come to the site for the complete and final installation. During the installation session, a one day training course will be provided to the customer to the customer for operation and maintenance procedure. The purchase at US$70/person/day plus all local transportation, accommodation, air tickets (round trip). Day charges include travel day.

Thank you for attention.