Micmachinery PET Plastic Processed bottle molding machine pet blower machine blower machine price
Product introduction
MIC-8Y semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the pure water, mineral water, carbonated drink bottles, pesticide bottles, oil bottles cosmetics, wide-mouth bottles etc.
Features:
* Adopting double crank to adjust molds, heavily locking molds stable and fast, using infrared oven to heat the preforms. The preforms are rotated and heated equally.
*The air system has been divided into two parts: pneumatic action part and bottle blowing part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
* The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
* The machine can be operated in the step-by-step mode and the semi-automatic mode.
The machine is small with low investment, easy and safe to operate.
Bottle blowing process
Main part and parameter
Main Machine | Model |
Semi-automatic Blow Molding Machine (included one set mould) | MIC-8y |
High Pressure Air Compressor | 1.2m3/min 30Kg |
Air Dryer | 2.0m3/min 30Kg |
Air Filter | 2.0 m3/min 30Kg |
Mould Water Chiller | 3HP |
Air compressor :
Mould Water Chiller
Air Cooling Dryer
Air Filter
Application :
Package:
Terms & Conditions:
*Payment: T/T 30% in advance, balance paid before shipment, video inspection or person inspection before shipment
* Delivery: 25-30 days after receiving the deposit.
* Packing: wooden case
* Validity: 1year
Sales After Service:
* Guaranty: One Year
* One set of consumable accessories will be provided with the machine.
* Before delivery, we will adjust the machine to fit for your product.
* Any question, you can mail/call us at any time. And our most experienced engineers is assigned to give consulting service, and always available for dispatching abroad.
* All spare parts are always available for delivery.
Installation/ Training:
The installation can be provided by the MIC Company. It must be after shipment and machine has arrived and factory must be ready equipped with all necessary requirements before booking installation with MIC Company. Our engineers will come to the site for the complete and final installation. During the installation session, a one day training course will be provided to the customer to the customer for operation and maintenance procedure. The purchase at US$70/person/day plus all local transportation, accommodation, air tickets (round trip). Day charges include travel day
FAQ for businessman friend:
Want to buy pet plastic mineral water bottle making machine?
Q1: How is the machine quality, why I want to choose your machine.
A1: We have machine process in our factory, operation video, and if you want to, we can send oversea technician to fix your problem, just inform us (14 working day in adavance).
Q2: How we can get the spare parts?
A2: Depends on the valve, we will provice free spare parts one set, and we have list for Electrical elements,
you can get from us, or the match model in your country.
Q3: What if I want to no troubles for the machine production.
A3: We can offer you the Shipment Port to Port, Door to Door, Installation and training with our technician and sales.
FAQ for engineer friend:
Problems | Causes analysis | Trouble-shooting |
Not complete forming | Not enough air pressure .air blowing retention time incorrect. | Increase pumps air pressure, Check air supply tube, and any leakage on solenoid valve. Adjust the retention time |
There is agglomeration on the neck or bottom of the bottle, like hook moon. | Air blowing retention time too long. Oven chamber adjustment not ready | Make the retention time shorter. Adjust the temperature on upper or down part. |
The bottom level not even on the both sides, i.e., one side low, the other high. | Stretching poles not on right place. Retention time too short. Upper part temperature of oven is too low. | Adjust the stretching poles. Make retention time longer and upper part temperature of oven up |
The lines on products are not clear.. | Heating time is too long or too less. not enough air pressure | Adjust the heating time, air pressure, check for any air leakage. |
No forming. | Heating time is too long. The preform becomes white. Heating up temperature is too high. | Shorten the heating time. Decrease the heating temperature. |
Oil filth left on the bottom of bottle. | Pole sealing buffer may be damaged.Φ16×2.4 | Replace it promptly |