Electrical Airless Paint Sprayer, Spraying Machine (OURS-680i)

Technical advantages:

1. Highly efficient utilization of powder

2. Thicker coating, uniform coating

3. Higher spraying efficiency

4. Low energy consumption

5. Quick color changes

 Technical features:

1. Without air, the airless paint sprayer can greatly reduce the flying of the paint mist, so it's environmentally friendly and can save the paint.

2. Higher viscosity material can be sprayed directly, reducing the amount of diluent and saving the cost of production.

3. Lacquered rate is high, the working efficiency is more than 2 times faster than air paint sprayer.

4. The power motor of the sprayer is pneumatic motor, there is no heat with working for a long time and the maintenance rate is reduced greatly.

5. Equipped with the pneumatic mixer and cone bottom stainless steel barrel, the mixing make the liquid material evenly, and there is no precipitation and no color difference to improve the coating quality.

6. The cone bottom stainless steel barrel makes no retention of the paint in the barrel, the dripping liquid material could be pumped clean.

We specialize in the whole line:

1) Pre-treatment system: Automatic Spraying pre-treatment and dipping pre-treatment are available;

2) Drying oven: Drying oven which drying the water after pre-treatment is designed according to customers’ actual conditions.

3) Powder coating spray system: Automatic spray reciprocator, manual spray equipment and Semi-auto (Auto-spraying with manual repairing spraying) are for your choice;

4) Powder recycling system: Cyclone equipment and cartridge filters is customized and introduced according to actual requirement by customer;

5) Curing oven: Tunnel curing oven, bridge type curing oven, Electric power heating curing oven, Gas-heating curing oven, Diesel heating curing oven, High temperature, lower temperature curing oven is available for fitting your sole factory.

6) Conveying system: Various design according to different requirement by customer on the basis of customers' workpiece and output information.

7) Control system: PLC control, with or without touch screen

8) Spray gun and reciprocator

Our Factory: 

If you are interested in our products, don’t hesitate to contact us, we will give you the most professional reply and support within a short time.