Specifications

XH247 offset press 2 color with numbering ,sheet-fed offset press

XH247  offset press 2 color

 

Features:

1) Capability: Inking device of each unite has 16 ink rollers including 3 ink form rollers, guarantee the high precise printing quality, and can print double color, which can improve the efficiency and reduce the cost

Advanced ink feeding system, consisting of 16 ink form rollers including 3 ink rollers, ensure top quality prints.

2) Easily operate: water supplying, ink supplying and platform pressing each unites can be finished at different lever with the same handle. Joint pressure of printing rollers is controlled with an electric eye, which is more reliable and easy to be regulated.

3) Accurate orientation: adopt front lay and double-side pull guide for orientations, also install with tune-up devices for feed table, its side lay, plate cylinder, and No.2 unit.

4) Adopt independent ink system and damping system, can freely adjust feeding, best meeting various demands of different printing matters, more suitable for color printings.

5) Presetting counter: automatically stop feeding paper once preset quantity task are completed.

6) Double detect device: detect double sheets and multiple sheets, and automatically eliminate double and multiple sheets.

Double turn-around function: ensure the sufficient dryness of ink demanding of special printing matter

7) Sprayer device: make spraying and printing run in synchronization, prevent printing matter from dirty

8)Centralized oil feed system: more convenient for maintenance.

9) Touch device: realize rapid loading and unloading plate, easier operation and better safety

 

Technical data of offset press 2 color:

Model	XH247IIG/ XH247IIGNP	XH256IIG/ XH256IIGNP
Max. Paper size	470x365mm	560x390mm
Max. Printing area	450x345mm	550x380mm
PS Plate size	470x395x0.15mm	560x420x0.15mm
Rubber blanket size	466x415x1.95mm	560x454x1.95mm
Paper weight	28-250gsm
Paper Speed	2000-9000sheets/h
Ink roller	14 pcs in each printing unit(3pcs forme rollers in each unit)
Dampening roller	4pcs in each printing unit (2pcs forme rollers in each unit)
Power	220V/50HZ (Single Phase)
Power of main motor	1.1KW	1.5KW
Power of air pump motor	1.1KW
Power supply	220V 50HZ Single phase
Weight	1200kg	1400kg
Over dimension	2.6x1.06x1.5m	2.6x1.15x1.5m
Numbering Capacity	Lateral: 7rowx7column=49 Vertical: 5rowx8column=40	Lateral: 7rowx8column=56 Vertical: 5rowx10column=50

Standard configure:

1.Static electricity eliminator

2.centralized lubricating system

3.Weko power sprayer

4. Coding supporter :4pcs on numbering part.

5.Code drawer::4 pcs

6.Resin plate cylinder:1pc

7.Perforating knife: 1 pc

 

 

 

About XSHEEN Technology: 

 

 

 

 

 

Any requirements can immediately contact me on or add Skype: xsheen2008