Sepcification

hot sale full Arcylic High Precision Industrial 3d printer kit i3 3d Printer machine

More pictures

Detail 

Exihibition

3d Printer machine

Three colors optional: Black,White and Transparent

3d Printer machine

Drawing Pictures

FAQ

1.Q: screen display is bright , but no characters represent or garbled characters?
A: Correct connection of wire behind the display ; adjust the Positioner( behind the display )to change brightness; power off or restart print machine.

2.Q: Auto Home back to zero operation, the motion axis collision abnormal sound?
A: XYZ axis motion toward each axis limit switch, reverse movement if found, please power off, then detect the motherboard
Line, the corresponding axis plug backwards.

3.Q: Auto Home back to zero operation to the limit position does not stop after the collision abnormal sound?
A: Check the power plug wire limit switch, manual control XYZ axis Check whether you can touch the limit switch.

4.Q: Z-axis side of the screw is rotated, while not turn?
A: First off, check the coupling is tight; check the two Z-axis motor harness.

5.Q: XYZ axis locked, you can not push?
A: Rest reset button operation after the control board; the switch is restarted; display knob operation Prepare → Disable
Steppers

6.Q: When replacing consumables, supplies can not pull out?
A: Preheat PLA operation until the temperature rises to 180 degrees, the first wire feed forward some distance, and then pull out the supplies.

7.Q: printer temperature rises slowly?
A: Check that the thermistor placed in a heating block holes inside; check heating rods wiring.

8.Q: print the first floor, can not be attached to the platform, supplies can not melt extrusion?
A: Check whether the platform leveling; check extruder is working properly, if the extruder reverse, try reversing the corresponding primary Board wiring.

9.Q: big shake when the printer is working?
A: When a fast-moving local printer will be significant vibration, is a normal phenomenon, you can rotate the display
Screen knob reduce FR percentage rate; screw fastening structure of a printer; belt tensioner

10.Q: When the printer back to zero, Z-axis motion screw abnormal sound?
A: coupling adjustment screw insertion depth to ensure that the flexible coupling section is working properly; screw nut grease.