Thermostatic Mixer Valve
DN25---thermostatic mixer valve
DN25---thermostatic mixer valve
Ideal working pressure | 0.1-0.5Mpa |
Cold water inlet temp. | 4-29 ℃ |
Hot water inlet temp. | 50-85 ℃ |
Mixed water outlet temp. | 35-55 ºC customized |
Flow rate (1 kg pressure drop) | 38.3 L/min |
Temp accuracy | ±2℃ |
Body material | Nickel plated Brass |
Thread | G 1” male thread |
Standard | QB2806-2006 |
1.Technical Data
DN25-S G1”
a. Working pressure:0.03-1Mpa
b. Ideal working pressure:0.1-0.5Mpa
c. Maximum working temperature:≤99 C
d. Flow rate(1 bar pressure drop): 38.3 L/Min
I: Safe lock toward hot direction.
thermostatic mixer valve , thermostatic valve , mixer valve
Knob Temperature :
Position | Min | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Max |
Temperature(℃) | - | 30 | 34 | 39 | 43 | 47 | 51 | 55 | - |
thermostatic mixer valve , thermostatic valve , mixer valve
2. Materials of Construction
a. Valve body : Brass with Ni-plated
b. Shutter : PPO
c. Spring : Stainless steel
d. Connection : Inlets-M, Outlet-M
Flow rate for pressure:
thermostatic mixer valve , thermostatic valve , mixer valve
3. Features:
a. Fail-safe on Hot or Cold Supply Failure
b. Delivers Stable Mixed Water Temperature
c. Extended Mix Temperature Range : 35-55 C
d. Idea for Domestic Water Application
e. Tamper-Proof Cap
thermostatic mixer valve , thermostatic valve , mixer valve
4. Usage of TMVs
For wash hand basins, bidets, baths and showers in hospitals, schools, sport and leisure facilities, prisons and other public buildings.
thermostatic mixer valve , thermostatic valve , mixer valve
5. Installation Precaution:
a.All installations should be carried out by a Licensed Professional.
b.Install in accordance with markings on valve body. i.e. hot water inlet-marked H, cold water inlet-marked C
c. After temperature setting, if inlets temperature or pressure fluctuates, outlet temperature variation is within +/-2 C.
d.The external check valves at inlets prevent cross-flow of hot&cold water when inlets pressure is not the same.
e.If the ratio between two inlets is too large, one flow-limiting valve should be fixed at the side of higher pressure.
f. Prior to installation, provisions should be made to flush the piping of any debris or other foreign materials to ensure proper system operation
thermostatic mixer valve , thermostatic valve , mixer valve
thermostatic mixer valve , thermostatic valve , mixer valve
SHENYANG BEIXIN ENERGY SAVING EQUIPMENT CO.,LTD
skype:sybxjn
tel:+86-013940169945