Preconditioning station based processing steps: cleaning, conditioning, broken, softening, rolling embryo, steaming and roasting and pre-press. Wherein the pretreatment of cottonseed to have lint, peel and other technology. Pretreatment Section of oil processing equipment is the most important part, but with different pre-processing machinery and equipment, and the different requirements of different end-oil production of raw materials and have different configurations and processes. Division I for different fuel pretreatment plant and process configuration is not the same, for example, the need for expanded rice bran pretreatment steps, the need for pre-processing of palm fruits to kill the yeast section, cottonseed pretreatment need to have lint process Wait.

Huatai grease mechanical pretreatment equipment advantages:
1, to reduce wear and tear on the follow-up equipment, improve environmental quality workshop;
2, improve equipment production, improve oil yield, to ensure maximum quality fat, meal and byproducts;
3, the lowest rate of fuel crushing, destructive for protein meals minimum.

Pretreatment Applicable oil: soybean, rice bran, sunflower, rapeseed, cottonseed, walnuts, corn germ, peanuts, copra, castor bean, palm kernel, palm nuts, sesame, olive, algae oil and the like.

Pretreatment capacity: 30-5000T / Day

 Cleaning sieve

Destoner

Elevator&Conveyor

Cooking pot

Oil press

The main section of extraction plant: leaching systems, steaming off the system, evaporation system, condensate recovery system and exhaust system. The main principle is to use a suitable solvent to feed embryo oil extracted, and then removing the solvent in the mixed oils. Leaching of our design to produce a mixture of oil does not contain any chemical solvents, and direct removal of exhaust, environmentally friendly.

It includes oil extraction, wet meal toasting, miscella evaporation, solvent recovery, exhaust gas recovery with paraffin and other processes.

1).Extraction section. Convey oilseeds flakes with scraper conveyor to extractor, make them contact with organic solvent fully through soak and spray to get miscella, miscella into miscella tank for removing solvent, and wet meal out of the bottom of extractor to desolventizer-toaster for solvent removal.

Rotocel extractor is typical extractor to extract oil with solvent.

2).Toasting section.Use DTDC to separate solvent out from wet meal to get dry meal without solvent for animal feeds, and solvent can be recycled through condensation.

DTDC desolventizer-toaster is used in this section.

3).Evaporation and steam-stripping section. Because of different boiling point,remove solvent from miscella to get crude soybean oil with No.1 long tube evaporator, No.2 long tube evaporator and steam-stripping column.

4).Solvent from meal toasting and evaporation and steam-stripping of miscella can be recycled through condensation.

5).Exhaust gas recovery section.Use water-bath type absorption tower to absorb and condense solvent gas in exhaust gas then recycle it.

Huatai mechanical oil extraction process section features:
1, the use of vacuum evaporation, the oil is high, the resulting good meal quality;
2, extractor design capacity, help to improve productivity, increase efficiency and reduce costs;
3, the leaching system design can be freely adjusted depending on the material and the desired yield and process effect, simple and reliable;
4, absorbing the unique exhaust system, environmental protection and efficient;
5, full of energy-saving design, multiple use of heat energy, saving the amount of steam, energy-saving and low consumption.

Section leaching field of application: pre-press cake, expeller cake machine, flakes, puffed material, all containing low oil.

Size: 20-5000T / D

Extractor

Desolventor

Evaporator&Striper

Condensor

Main Projects Scope:

30-5000T/D oilseeds pretreatment project

30-5000T/D oilseeds extraction project

5-1000T/D crude oil refining project

5-1000T/D crude oil fractionation project

Oil interesterification project

Oilseeds protein, phospholipid project

Natural pigment extraction project

Grain deep processing project

Typical Project:

30-1000T/D rice bran pretreatment, expanding, extraction project

30-600T/D rice bran oil refining project

150-1000T/D cottonseed dephenolizing protein

10-1000T/D palm fruit oil pressing project

10-500T/D Non acid method biodiesel production project

10-2000T/D corn deep processing project

Newest Technology:

1,Energy saving oil vacuum deodorization technology

2,Concentrated protein extraction technology

3,Mixed oil extraction technology

4,Mixed oil refining technology

5,Molecular distillation technology

6,Broken rice desaccharification technology

7,Continuous lignite extraction technology

Why Choose Us

1.Our factory is located in Huaxian County, the birth place of oil machinery in China, our factory covers an area of 100000m2, with 8 standard processing workshops, 202 sets of machining equipment, 580 staff, 12 intallation teams.

2.Our trademark "Hangpeng" win TOP 10 oil machine brand, because of excellent product quality and perfect after-sale service.

3.We have successfully obtained 27 national patents (including 8 invention patents), 6 international awards, 4 national awards and 2 provincial awards.

4.We have the most complete production certificates of oil machines, such as "Design license of pressure vessel","Manufacture license of pressure vessel","Design license of pressure pipeline","Installation,reconstruction and maintenance license of pressure pipeline", "Manufacture license of organic heat carrier furnace" and installation certification of mechanical and electrical equipment".

4. We are outstanding member enterprise of CCOA (Chinese Cereals and Oils Association), so we produce machines according to standard, and refined oil reaches the best edible oil standard.

5.We have strong R & D team, production team and installation team, offer perfect after-sale service, after delivering goods, we will dispatch technicians to instruct installation, commissioning and train your workers to operate machines by  yourselves.

6.We are provincial enterprise abiding by contracts and keeping promises, we have produced oil machines for 65 years, with rich experience and own brand, so we are responsible for all of our projects, especially for oversea projects.

7.Overseas projects: we are establishing every perfect overseas sample project all over the world, such as Russia,Kazakhstan,Uzbekistan,Tajikistan, Bolivia, Peru, Indonesia, Bangladesh, Thailand, the Philippines, Myanmar, Egypt, Sudan, Nigeria, Rwanda, Tanzania, etc.