Electronic training kit, UPS(Uninterruptible Power Supply)experiment kit
USD $500 - $3,000 /Set
Min.Order:1 Set
Shandong Xingke Intelligent Technology Co., Ltd.
1.system overview
The device consists of two kinds experiment boxes:reserved UPS and on-line UPS experiment box,each experiment box can divided into sine wave and square wave two kinds. It is
suitable for training teaching of “power electronics”,”electrical control technology”,”factory electrical control”,”electrical and electronical” related to majors of electrical type,automation type,mechanical and electric type
and electrical and electronical type.also can be used for training of primary,medium and advanced electrical
and related technology
2.technical parameters
Working power supply:AC220V/50HZ
Whole machine capacity:200W
Size:420×290×140 mm
3.system structure
3.1experiment kit structure:the kit shell is insulating plastic structure,Internal soft plastic substrate,main stress
components is aluminum alloy frame, ensure the safety of the structure and electrical.
3.2experiment kit power supply:power supply 220V±5%/50Hz,with power supply indication,power supply
indication,earth protection.electricity leakage protection.over current protection.
3.3 power supply output
1)AC power supply:sine wave:single phase 220V/50HZ ac power supply output(suit for all the loads that are supporting sine wave)
2)Square wave:50HZ output(only suit for resistance type load)
3)DC voltage signal source 12V/2A
3.4System constitution
1)reserved UPS:When the mains supply is in normal,the mains supply will supply power directly to load,When the
mains is beyond the scope of work or power failure, through the switch change to the battery inverter power
supply. No voltage regulator, has switching time, the output waveform is square wave or sine wave. Contains
the modules and circuit:
Serial number | Circuit name | circuit contained |
1 | bypass branch circuit | The bidirectional thyristor and its drive circuit |
2 | Power disconnected detection circuit | Power sampling circuit,voltage comparison circuit
|
3 | Transformer insulating circuit | Single-phase insulating transformer |
4 | Filter rectifier circuit | EMC filter circuit and whole bridge rectifier circuit |
5 | Battery charging circuit | Voltage reduced charging circuit(charging process has three stages of fast charging, constant current and floating) |
6 | Battery voltage detection circuit | Voltage detection circuit,the voltage overhigh,over low protection circuit |
7 | Sine wave inverter circuit | Voltage conversion circuit,PWM inverter circuit |
8 | Square wave inverter circuit | Voltage conversion circuit,square wave inverter circuit |
9 | Overload protection circuit | Voltage comparison circuit,voltage following circuit, protection circuit |
10 | Load circuit | 220V/35W lamp bead,220V single-phase AC motor |
11 | Display circuit | 128*64 LCD display |
12 | battery | Voltage 12V,capacity 7Ah |
2)on-line UPS:When the mains supply is in normal,rectify the mains supply and provide DC voltage to inverter,and
then provide AC supply to load from inverter,when mains supply in abnormal,will provide energy to inverter by
battery,the inverter will always in working state,ensure interrupt output.
Included module and circuit
Serial number | Circuit name | Included circuit |
1 | Power supply disconnected detection circuit | Power supply sampling circuit,voltage comparison circuit |
2 | Transformer insulating circuit | Single-phase insulating circuit |
3 | Filter rectifier circuit | EMC filter circuit and whole bridge rectifier circuit |
4 | Battery charging circuit | Voltage reduced charging circuit(the charging process has three stage of fast charging,constant current.floating charging) |
5 | Battery voltage detection circuit | Voltage detection circuit,voltage overhigh,over low protection circuit |
6 | Sine wave inverter circuit | Voltage conversion circuit,PWM inverter circuit |
7 | Square inverter circuit | Voltage conversion circuit,square inverter circuit |
8 | Overload protection circuit | Voltage comparison circuit,voltage following circuit, protection circuit |
9 | Load circuit | 220V/35W lamp bead,220V single-phase ac motor |
10 | Display circuit | 128*64 LCD display |
11 | battery | Voltage 12V,capacity 7Ah |
4.can complete experiment
1)single-phase whole bridge rectifier experiment
2)The bidirectional thyristor and its driving experiment
3)Insulating transformer cognitive experiment
4)EMC filter circuit cognitive experiment
5)Power supply sampling and voltage comparison circuit experiment
6)SCM voltage detection experiment
7)Voltage protection circuit experiment
8)Voltage follow circuit performance experiment
9)Battery charging circuit experiment
10) Battery voltage,electricity quantity experiment
11) PWM generation and drive circuit experiment
12) 555 multivibrator circuit experiment
13) square wave inverter experiment
14) sine wave inverter circuit experiment
15) the cognitive experiment of hall element
16) overload protection experiment
17) LCD display circuit experiment