Digital Trainer, Vocational Training Equipment,XK-DEB1 Modularization Digital Electronic Training Set

1. Product Introduction:

XK-DEB1 adopts modularization expansion boards and mother board; XK-DEB1 includes logic level input output,Nixie tube display circuit,basic logic gate,RS,JK,D trigger circuit,discrete component library,bread board,toggle switch,binary counter circuit, it will finish experiments required by digital electronics course. Students can be quickly master the knowledge of digital electronics system design through experiments, also supply EDA design and learning for students.

2. Training box main parameters:

2.1 Overall Size: 485 (L) x 320 (W) x 165mm (H); Weight: 4.5kg

2.2 The power supply: single-phase power supply, AC 220 V, 50/60 Hz, power<20VA.

2.3 With grounding protection,over-current protection,power supply indication,main power indication

2.4 Working environment: temperature: -10℃~+40℃ 

3. Signal Source Technology Parameter:

3.1 DC 5V voltage source, capacity: 1A

3.2 DC ±12V voltage source, capacity: 0.5A

3.3 Adjustable 1.25~10V, DC voltage source, capacity: 0.5A

3.4 Signal generator

1) Frequency range: 1Hz~500KHz

2) Signal type: sine wave, triangular wave, square wave

3) Signal level type: TTL,CMOS

4) Duty ratio regulate range: 15%~85%

5) Frequency, waveform selection, and duty ratio regulation, noninterference

6) Range adjusted: 0V~10V

4. Composition of kit

XK-DEB1 mainly consists of experiment box,expansion board and accessories.

4.1 Experiment expansion board

1) A/D training module, learning working principle of A/D conversion chip ADC0809

2) D/A training module, learning working principle of D/A conversion chip ADC0832

3) ROM training module, learning programming and reading of semiconductor read-only memory

4) RAM training module, learning read & write of semiconductor RAM

5) ALU training module, learning principle and operational function of 4-bit arithmetic logic unit

6) IC extending module, finish function verification & integration experiment of various chips

7) CPLD training module, learning principle and application method of programmable logic device

4.2 Accessories of experiment

1) K4 Experiment wires: 40 pieces

2) Power line: 1pce

3) Manual book: 1pce

5,Experiment Project

5.1 Research of semiconductor diode,semiconductor audion switch characters

5.2 Discrete components logic gate circuit

5.3 Basic gate circuit test experiment

5.4 Logical functions and parameter testing of TTL integration logic gate

5.5 Logic functions and parameter testing of CMOS integration logic gate

5.6 Application of TTL collector open circuit gate and three state output gate

5.7 Combinational logic circuit analysis and design

5.8 Decoder and its application

5.9 Numeric comparison

5.10 Trigger and its application

5.11 Shifting register and its application

5.12 Counter and its application

5.13 Pulse signal generates circuit

5.14 Pulse delay and wave shaping circuit

5.15 555 time basic circuit and its application

5.16 Arithmetic logic unit experiment

5.17 D/A conversion experiment

5.18 A/D conversion experiment

5.19 RAM experiment

5.20 ROM experiment

5.21 CPLD programming experiment

5.22 Multi-way responder