Car simulator

Product Overview
Engine assembly and control unit, the original vehicle wiring harness, instrument cluster, various sensors and actuators, fuel tank and fuel pump assembly, batteries, digital voltmeter, vacuum gauge, fuel gauge, ignition switch, heat sink, color panel of the circuit schematic, external testing terminal, intelligent fault set system, safety devices, mobile stand, manual, etc..

Main parameters:

Engine Type: inline four-stroke 8-valve electronically controlled gasoline engine
Displacement: 1.8L
Operating voltage: 12V DC
Operating voltage: 12V DC
Size:1500*1000*2000mm
Weight:150Kg

Main function
1.Dynamic operating functions: Santana 3000BKT engine assembly basis, equipped with the auxiliary control system, sensors and actuators, make sure the normal operation of the engine, dynamic presentations of their work process.
2.Display functions: Through the original vehicle wiring harness to connect the combination of instruments, vacuum pressure gauge, fuel pressure gauge, can be real-time display engine operation during the various state dynamic, static signal parameters.
3.Detection functions: Training platform panels are installed on the external detection terminals, can be directly on the panel detection sensor, actuator, the engine control unit pin electrical signals, such as resistance, voltage, frequency, waveform signals.
4.Signal simulation capabilities: Can do signal simulation to the engine electronic control system sensor, and real-time detection engine running state changes caused by changes in the sensor input signal.
5.Self-diagnostic function: Equipped with computer data detection port, dedicated or universal decoding apparatus can be connected to the engine electronic control system ECU coding queries, read trouble code, clear trouble code, read data stream, waveform analysis, the implementation of component testing from diagnostic function.
6.Fault setting functions: Equipped with intelligent fault setting and assessment system, with a test database compatible with the device, test database can be edited according to user needs, be able to set and control module of the common failure of the foot. Installed on RJ45 network interface, equipped with RS-232 serial port, can use the available cable and other equipment failure set the device to form a network, set by the host computer to control each piece of equipment failures, troubleshooting, parameter setting, remote start, feedback, assessment score.