Cell and Tissue Culture Flasks are perfect for cell growth and cell yields aim on little and medium input volume - Available with 5 different growth areas of 12.5cm2 , 25cm2 , 75cm2 , 182cm2 , 300cm2
- Available in surface-treated or Non-treated
- Flacks surface is flat and free from striation to maximize usable growth area
- 2 different cap styles can be used in both open and closed systems
- Innovative angled neck design offers good pipet and cell scraper access in
- Upper triangular and wider base shape provides stability
- Protrudent ridge on the back side of the flask makes it easy for stacking
- Special area near the neck for easy mark writing
- Both flask sides have engraved graduation
- Strict integrity tested
- Sterilized by gamma irradiation
- Non-pyrogenic
Ordering Information - Package in durable zip resealable self-standing plastic bags that allow flasks to remain upright and reduce contamination
- Every package bag is labeled with lot number for quality traceability.
Cat. No. | Volume (ml) | Surface Type | Working Volume (ml) | Cap Styles | Sterile | Qty. per bag/case | TCF001025 | 25 | General, Non-treated | 20 | Standard | Y | 10/200 | TCF002025 | 25 | 20 | Vent | Y | 10/200 | TCF001050 | 50 | 40 | Standard | Y | 10/200 | TCF002050 | 50 | 40 | Vent | Y | 10/200 | TCF001250 | 250 | 175 | Standard | Y | 5/100 | TCF002250 | 250 | 175 | Vent | Y | 5/100 | TCF001600 | 600 | 400 | Standard | Y | 5/40 | TCF002600 | 600 | 400 | Vent | Y | 5/40 | TCF001850 | 850 | 800 | Standard | Y | 3/18 | TCF002850 | 850 | 800 | Vent | Y | 3/18 | Cat. No. | Volume (ml) | Surface Type | Appro. Cell Growth Area (cm2) | Cap Styles | Sterile | Qty. per bag/case | TCF011025 | 25 | Standard, Treated | 12.5 | Standard | Y | 10/200 | TCF012025 | 25 | 12.5 | Vent | Y | 10/200 | TCF011050 | 50 | 25.0 | Standard | Y | 10/200 | TCF012050 | 50 | 25.0 | Vent | Y | 10/200 | TCF011250 | 250 | 75.0 | Standard | Y | 5/100 | TCF012250 | 250 | 75.0 | Vent | Y | 5/100 | TCF011600 | 600 | 182.0 | Standard | Y | 5/40 | TCF012600 | 600 | 182.0 | Vent | Y | 5/40 | TCF011850 | 850 | 300.0 | Standard | Y | 3/18 | TCF012850 | 850 | 300.0 | Vent | Y | 3/18 |
Plug Sealing Caps: Standard polyethylene caps can be used in closed systems,providing a liquild and gas sheer seal. But it can be simply unscrew the cap one quarter of a turn, this cap can also be used in open system. Vented Caps: Vented polyethylene caps contain a 0.22μm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination.
|