Sound Active, Master / Slave,DMX LED MINI Moving Head Spot
Negotiable /Piece
Min.Order:1 Piece
Guangzhou Baiyun Shijing Mingliang Stage Lighting Equipment Factory
Sound Active, Master / Slave,DMX LED MINI Moving Head Spot
This is led wall washer whice has the following features:
1. Long working life which is more than 100000 hours under normal working conditions.
2. Bright color, color saturation can be reached at more than 90% to produce more brilliant light effects
3. High efficiency and low power consumption. There is no color filter loss, being efficient at electro-optic transfer.
4. RGBW color mixing with or without DMX control.
5. Environmental protected, since there is no ultraviolet radiation and infrared ray in the spectrum, it is low at heat emission and radiation.
6. Current protection to PCB panel and over-heat protection
Technical parameters:
LAMP SOURCE:
Light source:7x12.8watt RGBW 4in1
Rated light output: up to 3500 lumen
LED power consumption: 89.6W
Total power consumption: 134.6W
Low power class,ultra brightness
MOVEMENT:
Extremely accurate positioning
Moving-head operated via either 8 or 16 bit resolution
PAN and TILT automatic repositioning
Moving-head range : 540° (PAN), 270° (TILT)
POWER SUPPLY:
Electronic supply with active PFC
110 to 240 Volts - 50/60Hz
Power 100 Watt max
OPERATING PARAMETERS:
Operating positions: all (device on floor or fixed to a support)
Maximum permitted ambient temperature(Ta max): 45°C (113°F)
Minimum permitted ambient temperature authorised (Ta min): -10°C (14°F)
Packaging Detail: Standard exporting carton case and flight case both are available.
Shipping Way:
1. By Express ( DHL, Fedex, Ups, EMS):Door to Door
2. By Sea: Port to Port
3. By Air: Airport to Airport
1. Before sales, we have taken 1 or 2 months to work in our own factory in order to be familiar with the products. Therefore, we are definitely professional to serve you.
2. Efficient communication and patient answer can be always provided to you.
3. You can get the most substantial and best quality products from us.
4. Optimum system solution will be provided based on your specific requirements.
5. For the packaging of each product, we use the best materials for you to prevent the damage in transport.
6. After-sales service is definitely offered. Moreover, we pay much attention to the after-sales service and we believe that good after-sales service is the blood of our company.
We are specialized in LED Moving Head Light, LED Architectural Light, LED Die-Casting Par Light, High Powe LED Series, LED Par Light, LED Effect Light, LED Low Power Series, Scan Series, Follow Spot Light, Laser Light, Outdoor Light, Strobe Light, Stage Effect Series, Controller Series etc.
our product show:
Certificates
1. Q: Are you a manufacturer or trading company?
We are a professional stage light factory
2. Q: What's the shipping method and deliery time?
Our products could be shipped by Sea, by Air or by Express. Which method to be used is based on the weight and size of the package and with consideration of customer's requirements. By sea: 20-40days,by air: 5-10days ;by express: 3-6days
3.How about the warranty?
We offer one year warranty.
We make sure that all the products are in perfect condition before shipping, if there are any problems ,we will be try our best to solve the problems for you .
our warranty is One Year.