Screw Sand Washer

1. screw sand washer application:

Screw sand washer is mainly used for sand factory, electric pole factory, work-site of building and concrete dam to wash, classifying and de-watering various sands.

2. screw sand washer Three functions: washing, dewatering, classifying

This sand washer adopt inclination of 15°,under the water tub, three weir plates form the sediment pool, the screw head is immersed in this pool, the screw is driven by electric motor through reducer rotating continuously, the fresh water is feeding from porous plate at bottom of sediment pool, this machine have three functions of washing, de-watering, classifying.

Washing: The sand is feeding into the sediment pool from the feeding box, acting by rotating screw blade, the sand is turning and rolling and grinding each other to eliminate impurity and water-air layer around sand to facilitate de-water. The fresh eater rising current from the porous plate carry foreign matter to water surface and overflow the weir plate, to finish washing processing

De-watering: The sand with bigger density is sunken down to tub bottom, the screw blade push this sand upwards, when passing through upper tub of proper length above water level, the water is draining into sediment pool from another drainage ditch, the de-watered sand is out from the discharging opening.

Classifying Material: classifying is realized by overflowing the non-needed fines, the controlling method is adjusting height of overflowing weir and adjusting speed of screw.

3. screw sand washer Technical Parameter

Before sales service:

Provide the program design and technological flow design; choose the most suitable equipment  for customer; 

design and manufacture products according to customer's demands; provide training of operational technicians 

for customer.

Sales service:

Finish the equipment inspection with you; assist you in drawing out the construction scheme and detailed flow.

After sales service:

Send technicians to installation site for the guidance, equipment adjustment and training.

Please don’t hesitate to inform us:
1.What’s kind of your raw material?
2. Now your raw stone size?
3. What’s the capacity ? (T/H)
4. What’s the final stone size request?
5. Others?

If possible,please send us some ore sample, we will do a test for you.