High quality ore spiral washing equipment

Application of Spiral Washer (Spiral Conveyor):

     XL series screw sand washer is the professional sand washing machine developed on the basis of previous technology and combined with the actual situation of sand and gravel industry. It can separate the excess powder and mud and so on in the raw material. When working, the sand will grind each other under the driving of the impellers. By this way it can not only remove the impurities wrapped on the surface of the sand, nut also destroy the vapor layer wrapped around the sand, and completes the impurity cleaning processing in powerful water flow.

Features of Spiral Washer (Spiral Conveyor):

1. Three functions: cleaning, dewatering and grading.

2. Cleaning and upward conveying at the same time.
3. Low water consumption; durable.
4. Impellers use wear resisting plate or polyurethane material, reduce the running cost.
5. Designed according to low volume, low investment.
6. Capacity of screw sand washer is above 100 t/h, effectively control the sand washing loss.

Work Principle of Spiral washer (Spiral Conveyor):

 Screw sand washer is developed according to the principle of different particles with different fall velocities because of their sizes and densities. Fine particles float in the water and form the overflow; coarse particles fall down to the bottom of the trough and are pushed to the top port by the impellers and discharge. During working, the motor drives the impellers to rotate slowly by triangle belt, reducer motor and gears. Sand enters the washing trough from the feed trough, roll and grind each other under the driving of impellers. Then wrapped impurity around the sand surface is removed. Then the impurities and dirt are removed by the added water flow; cleaned material is conveyed upward by the rotating impellers to the discharge chute.     

Technical Parameter of Spiral washer: