Specifications
Piston Calibrate pressure gauge Dead Weight Testerprofessional manufacturer
quick shipment
CE
Piston Calibrate pressure gauge Dead Weight Tester
Description of Piston Calibrate pressure gauge Dead Weight Tester:
Piston Calibrate pressure gauge Dead Weight Tester is a calibration standard which uses a piston cylinder on which a load is placed to make an equilibrium with an applied pressure underneath the piston. Deadweight testers are so called primary standards which means that the pressure measured by a deadweight tester is defined through other quantities; Length, mass and time. Typically deadweight testers are used in calibration laboratories to calibrate pressure transfer standards like electronic pressure measuring devices.
Purpose of Piston Calibrate pressure gauge Dead Weight Tester:
YS-6 Deadweight Tester. Pressure Range 5.8 - 87psi. Accuracy: 0.015% or 0.020% of reading.
YS-60 Deadweight Tester. Pressure Range 14.5 - 870 psi. Accuracy: 0.015% or 0.020% of reading.
YS600 Deadweight Tester. Pressure Range 145 - 8700 psi. Accuracy: 0.015% or 0.020% of reading
Specifications of Piston Calibrate pressure gauge Dead Weight Tester:
Model | YS-6 | YS-60 | YS-250 | YS-600 | |||||
Measure Range | bar | 0.4-6 | 1-60 | 5-250 | 10-600 | ||||
Accuracy | % | 0.02 or 0.05 | |||||||
Nominal Area of Piston | cm2 | 1 | 0.5 | 0.2 | 0.1 | ||||
Carrier and Piston | Nominal Mass | kg | 0.4 | 0.5 | 1 | 1 | |||
Produced Pressure | bar | 0.4 | 1 | 5 | 10 | ||||
Supplied Weights | Nominal Mass | kg | 0.10.5 | 0.52.5 | 15 | 15 | |||
Produced Pressure | bar | 0.10.5 | 15 | 525 | 1050 | ||||
Quantity Block | pcs | 610 | 411 | 49 | 411 | ||||
Pressure Connection | M 20×1.5 | ||||||||
Working Medium | Transformer Oil (viscosity 9~12 centistokes at 20i), | ||||||||
Dimensions | mm | 630×382×593 | |||||||
Weight | kg | 20+5.6 | 26+29.5 | 26+49 | 26+59 | ||||