Specifications

Dead Weight Pressure Tester ( High Pressure )
1 high accuracy,
2 high reproducibility
3 high credibility standard instrumen

Dead Weight Pressure Tester ( High Pressure )

 

Description:

Deadweight tester (DWT) is a calibration standard which uses a piston cylinder on which a load is placed to make an equilibrium with an applied pressure underneath the piston. Deadweight testers are so called primary standards which means that the pressure measured by a deadweight tester is defined through other quantities; Length, mass and time. Typically deadweight testers are used in calibration laboratories to calibrate pressure transfer standards like electronic pressure measuring devices.
 
Purpose:
YS-6 Deadweight Tester. Pressure Range 5.8 - 87psi. Accuracy: 0.015% or 0.020% of reading.
YS-60 Deadweight Tester. Pressure Range 14.5 - 870 psi. Accuracy: 0.015% or 0.020% of reading.
YS600 Deadweight Tester. Pressure Range 145 - 8700 psi. Accuracy: 0.015% or 0.020% of reading.

 

Specifications:

Model			YS-6		YS-60		YS-250		YS-600
Measure Range		bar	0.4-6		1-60		5-250		10-600
Accuracy		%	0.02 or 0.05
Nominal Area of Piston		cm2	1		0.5		0.2		0.1
Carrier and Piston	Nominal Mass	kg	0.4		0.5		1		1
	Produced Pressure	bar	0.4		1		5		10
Supplied Weights	Nominal Mass	kg	0.10.5		0.52.5		15		15
	Produced Pressure	bar	0.10.5		15		525		1050
	Quantity Block	pcs	610		411		49		411
Pressure Connection			M 20×1.5
Working Medium			Transformer Oil (viscosity 9~12 centistokes at 20i), or Medical Castor Oil (aciditymg KOH/g)
Dimensions		mm	630×382×593
Weight		kg	20+5.6	26+29.5		26+49		26+59