Ultrasound level sensor
USD $170.00 - $170.00 /Unit
Min.Order:1 Unit
Xi'an Yunyi Instrument Co., Ltd.
Ultrasound level sensor
Features of Ultrasound level sensor :
1 Programmable cable interface using the PC software for proximity switch parameter settings
2 Current and voltage outputs
3 Synchronization
4 You can adjust the sensitivity of the acoustic energy and
5 Temperature Compensation
Specification of Ultrasound level sensor :
General Specifications | |
Sensing distance | 80…2000mm |
Adjustment range | 80…2000mm |
Unusable area | 0…80mm |
Standard target plate | 100mm×100mm |
Transducer frequency | About 112 kHz |
Response delay | About 195ms |
Indicators/Operating means | |
LED blue | Power on |
LED yellow | indication of the switching state |
Flashing:program function object detected | |
LED red | permanently red: Error Red,flashing:program function,object not detected |
Electrical specifications | |
Operating voltage UB | 10…30VDC,ripple10%ss |
No-load supply current | ≤50mA |
Output | |
Output type | 1 analogue output 0…10V |
Resolution | 0.11mm at max.sensing range |
Deviation of the characteristic curve | ±1% of full-scale value |
Repeat accuracy | ±0.5% of full-scale value |
Load impedance | >1k Ohm |
Temperature influence | ±2% of full-scale value |
Ambient conditions | |
Ambient temperature | -25…70℃ |
Storage temperature | -40…85℃ |
Mechanical specifications | |
Protection grade | IP67 |
Connection | Connector M12x1,4-PIN |
Material Housing | PBT |
Transducer | epoxy resin/hollow glass sphere mixture; Polyurethane foam |
Weight | 150g |
Dimension and Electrical Connection of Ultrasound level sensor :
1 BN=BROWN
2 WH=WHITE
3 BU=BLUE
4 BK=BLACK
Connector