Bucket elevator with high conveying capacity in cement industry

1.Description:

Bucket elevator has the advantages of big conveying capacity, high hoisting height, stable and reliable operation and long service life. Performance and parameter are in accordance with JB3926-85 Vertical Bucket Elevator, which is consistent with the international and foreign advanced standards and the towing circle chain is in accordance with MT36-80 High-Strength Circle Chain for Mine.

2.Application:

The machine is applicable for conveying the power, grain and block materials, such as coal, cement, block, sand, clay and ore. The bucket elevator is allowed to convey materials with high temperature when armed with special circle chain structure.

3.Characteristics:

1).Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

2).Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials,but also lift high polishing materials. Sound seal and little circumstance pollution.

3).Good running reliability, the advanced design principle and handling method assure reliability of whole machine running,

the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

4).The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between

materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

5).wide application

bucket elevator as one of material handling equipment  is used in powder, graininess and patch delivering upward unpolishing

and subpolishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust coke.

4.The technical parameters of the universal bucket elevator  

Please don’t hesitate to inform us:
1.What’s kind of your raw material? And the ore TEST REPORT?
2. Now your raw stone size?
3. What’s the capacity ? (T/H)
4. What’s the final ore concentrate grade request?
5. Others?

If possible,please send us some ore sample, we will do a test for you.

Before sales service:

Provide the program design and technological flow design; choose the most suitable equipment  for customer; 

design and manufacture products according to customer's demands; provide training of operational technicians 

for customer.

Sales service:

Finish the equipment inspection with you; assist you in drawing out the construction scheme and detailed flow.

After sales service:

Send technicians to installation site for the guidance, equipment adjustment and training.