Specifications

China suppiler ultrasonic sensor level transmitter price
1 professional manufacturer
2 quick shipment
3 CE

China suppiler  ultrasonic sensor level transmitter price    

 

Features:

1 Programmable cable interface using the PC software for proximity switch parameter settings
2 Current and voltage outputs
3 Synchronization
4 You can adjust the sensitivity of the acoustic energy and
5 Temperature Compensation

 

 

general characteristic
Sensing range		80 ... 2000 mm
adjustment range		120 ... 2000 mm
blind		0 ... 80 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 180 kHz
latency		Min 65ms factory seting 195ms
Temperature/TEACH-IN connector		Temperature compensation , Evaluation range programming , output function setting
electrical specification
working voltage		10 ... 30 V DC , ripple 10 %SS
Power Consumption		≤ 900 mW
connector
Type		RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
input
synchronization		two-way 0-level -UB...+1 V 1-level: +4 V...+UB  input impedance : > 12 KOhm synchronization pulse : ≥ 100 µs, clock cycle : ≥ 2 ms
synchronizing frequency
	Normal operating mode	max. 30 Hz
	Multi-mode	≤ 30 Hz / n , n = number of sensors , n ≤ 5
output
type		1way Current output 4...20mA 1way voltage output 0...10V
latency		< 150 ms
resolution ratio		evaluation range [mm]/4000, but ≥ 0.35 mm
Characteristic curve deviation		≤ 0.2 % of full-scale value
repeated accuracy		≤ 0.1 % of full-scale value
load impedance		current output: ≤ 500 Ohm  Voltage output: ≥ 1000 Ohm
temperature drift		≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation)
Licensing and Certification
UL Certification		cULus Listed, general requirements
CSA  Certification		cCSAus Listed,  General Purpose
CCC  Certification		The maximum operating voltage of 36 volts products, without going through the license certification, and there is no need to identify with CCC-.
surrounding
ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
storage temperature		-40 ... 85 °C (-40 ... 185 °F)
mechanical characteristics
Wiring type		Connector M12 x 1 , 5-pin
protection		IP65
material
	case	SS 1.4305 PLANSTIC PART PBT
	transducer	Epoxy resin / hollow glass sphere mixture; polyurethane foam
weight		170 g

 

 

Specification of    ultrasonic sensor  :

 

1 Detection range: 15cm - 200cm;

 

2 Blind: 15cm;

 

3 Accuracy: <3mm;

 

4 Transducer frequency: 180Khz;

 

5 Transducers emitting angle: 14 degrees;

 

6 Operating voltage: 12v or 24v;

 

7 Operating current: less than 50mA;

 

8 Output current :4 - 20mA (corresponding to 15-200cm)

 

9 Shape: 30mm diameter threaded pipe, length 80mm

 

 

 

 

 

About Us:
Xi'an Yunyi Instrument Co., Ltd. is a professional manufacturer that engaged in the fields of pressure measurement instrument, the chief engineer Mr Tian has more than 30 years on this area, he is one of the engineers who introduced the Rosemount technology. We specializing in developing high precision pressure transmitter and pressure gauges. And we also develop temperature transmitter, level transmitter, densitometer etc. They are widely used in chemical, petroleum, paper, electricity, city gas, environmental protection, water treatment and other fields.

 

If you need this  ultrasonic sensor , please visit the website

skype:wangxiaoyuncalar