TDS-100P portable type ultrasonic flow meter

Technology features:

1:  measurement accuracy: better than 1%

2:  repeatability:better than 0.2%

3:  operating power:220VAC(standard),110VAC(optional)

4:  measurement cycle:500ms(two times per second,collect 128 set datas per cycle)

5:  battery: built-in Ni-MH,continually working up to 24 hours.

6:  installation method: clamp-on installation.

7:  display:2*20 backlit LCD(instant flow rate,accumulating flow rate,signal status,etc.)

8:  signal output:isolation RS485

9:  communication protocol:MODBUS protocol

10: print output:built-in thermal printer,achive to print online or at fixed time ,other option is SD card datalogger.

11: other fuctions:self-diagnosis,indicate present working status is normal or not.

12:  transducers:clamp-on sensors

Optional sensors:

1.Standard Small stent sensors(DN15-100mm)

Fluid temperature: ≤ 160 Degrees 

Dimension: 200 × 25 × 25mm

Handle Length: 100mm

2.Standard midsize stent sensors(DN50-DN700mm) (Magnetic)

Fluid temperature: ≤ 160 Degrees

Flow range :0.05-32m ³ / sec

Dimension: 280 × 40 × 40mm (2)

3. Standard Small sensors(DN15-100mm) (Magnetic)

Fluid temperature: ≤ 160 Degrees 

Dimension: 50*30*29mm

4.Standard midsize sensors M2(DN50-DN700mm)  (Magnetic)  

Fluid temperature: ≤ 160 Degrees

Flow range :0.05-32m ³ / sec

Dimension: 100*40*35mm

5.Standard large size sensors L2(DN300-DN6000mm)  (Magnetic)

Fluid temperature: ≤ 160 Degrees

Dimension: 120*55*45mm