Product Details

LCD Variable Area Flow Meter

Description of lcd Variable Area Flow Meter :

Variable Area Flow Meter (metal pipe flow meter) is one of the commonly used in industrial automation process control variable area flow meter. It has small volume, wide detection range, convenient use, etc, it can be used to measure the rate of flow of liquid, gas and steam, especially suitable for low velocity of small flow measurement. This series of metal tube float flowmeter with its excellent performance and reliability, has been widely used in petrochemical, steel, electric power, metallurgy, light industry, food, pharmaceutical, water treatment and other industries.

Features of lcd Variable Area Flow Meter :

1. Can be applied to small diameter and low velocity medium flow measurement

2. Straight pipe for the request is not high, range ratio 10:1

3. Can take instructions given header, the double line transient/cumulative flow liquid crystal display

4. All-metal structure, it is suitable for high temperature, high pressure and strong corrosive medium

5. To be viscosity have a certain limit current cannot measure the viscosity of the fluid

Detailed parameters of lcd Variable Area Flow Meter :

1. Fine degrees: 1.0 F.S

2. Range than: Standard 10:1

3. Measuring range: water (20℃)1~200000 l/h air (20 ℃ and 0.1013 MPa) 0.03 ~ 6000 m3/ h

4. Pressure level: standard: 4.0 MPa (DN15 - () 1.6 MPa (DN80 - DN200)

5. High pressure type: 32 mpa (DN15 - () or less 16 mpa (DN80 - DN200) or less

6. The pressure loss: 7 kpa to 70 kpa

7. Medium temperature: standard: - 40 ℃ ~ 100 ℃; PTFE: 0 ℃ ~ 100 ℃; High temperature: 110 ℃ ~ 450 ℃

8. Ambient temperature: - 30 ℃ ~ 80 ℃

9. Medium viscosity: DN15:5 mpa or less) s (F15.1 F15.3 acuities were 30 mpa. S (F15.1 - F15.3); DN25: acuities were 250 mpa. S (~ DN200: acuities were 300 mpa. S

10. Cable interface: M20 * 1.5 internal thread (flameproof for 1/2 NPT thread)

11.Power supply: 24 VDC (12 VDC - 32 VDC)

12.Load characteristic: 600 Ω or less

13. Protection grade: IP65