Product Details

smart 4-20ma vortex liquid flow meter

Brief introduction

vortex flow meter is widely used in petroleum, chemical, metallurgical, power, textile, paper and other industries on the superheated steam, saturated steam, compressed air and gases ( oxygen, nitrogen and hydrogen, natural gas, gas ), water and liquid ( such as: water, gasoline, alcohol, benzene and so on ) measurement and control .

Main features
1.Two-wire and three -wire system.

2.large range

3.Can be used to measure gas,steam and liquid.

4.EVC function is optional.

Technical parameters

Nominal diameter(mm)	25,40,50,65,80,100,125,150,200,250,300,(300~1000 Insert type)
Nominal pressure (MPa)	DN25-DN200 4.0(>4.0 Supply agreement),DN250-DN300 1.6(>1.6 Supply agreement)
Medium temperature(℃)	Piezoelectric type:-40~260,-40~320;Capacitance type : -40~300, -40~400,-40~450(Supply agreement)
Body material	1Cr18Ni9Ti,(Other materials supply agreement)
Allowable vibration acceleration	Piezoelectric type:0.2g Capacitance type:1.0~2.0g
Accuracy	±1%R,±1.5%R,±1FS;Insert type:±2.5%R,±2.5%FS
Range of	1:6~1:30
Power supply voltage	Sensor:+12V DC,+24V DC;Transmitter:+12V DC ,+24V DC;Battery type:3.6V Battery
Output signal	Square wave pulse ( not including the battery power supply type ): high level or low level5V,1V; current: 4~ 20mA
Pressure loss coefficient	In line with the JB / T9249standard Cd = 2.4
Explosion proof marks	Intrinsic safety type: Exd IA CT2-T5 flameproof type: Exd CT2-T5
Protection grade	The ordinary IP65 diving type IP68
Environmental conditions	Temperature - 20~ 55,5% ~ 90% of relative humidity, atmospheric pressure is 86 ~ 106kPa
Applicable medium	Gas, liquid, steam
Transmission distance	Three wire system pulse output type: < 300m, two line standard current output type (4 ~ 20mA ): load resistance less than 750ohm