Specifications

1.cement raw mill
2.Lower consumption
3.high capacity and various size
4.Auto control,stable operation

Introduction of raw mill:

It has many advantages such as, strong adaptability, continuous production, large crushing ratio, easy to adjust the size of the products. 
Raw mill is mainly used in grinding raw materials and final products in cement plant. It is also suitable for grinding various ores and other materials in the metallurgy, mine, chemical, construction and other industries. Besides, it has two forms of milling, one is an open form, and the other is a recycle close form equipped with powder concentrator. It is widely applied in many industries and has convenient operation. 

 

Usage of raw mill:

Raw mill is used widely for grinding (both drying and grinding) cement raw material and other materials in buinding material, metallurgical, electric and chemical industries.

 

Sorts and features:

• Common raw mill: It is used for small & medium-sized raw materials grinding system which generally is cycle flow system with material separating system outside the mill.
• Air-swept mill: The feature of air-swept is sort and thick in shell, wide in diameter of inlet&outlet trunion, large in grate gap area of diaphragms between drying chamber&grinding chamber, no grate plate in mill outlet. Therefore, air speed inside of mill could reach 5m/s due to small redidtance and drying capacity is strong since large amount of hot air could get in.
• Outlet discharging&lifting cycle mill: Comparing with air-swept mill, materials, passing through the drying chamber, are discharged at the outlet of grinding cnamber by mechanical way, and then fed into seperator by elevator which woud return the coarse materials to mill again for cycle grinding.

 

Spec./m(dia.*length)	Speed(r/min)	Feeding sizze(mm)	Capacity(t/h)	Griding media loading(t)	Main motor(kw)	Mian reducer
Φ 2.2*7.0	21.7	< 25	20-25	35	380	ZD70
Φ 2.2*7.5	21.7	< 25	22-26	35	380	ZD70
Φ 2.2*8.0	21.5	< 25	23-27	36	475	ZD70
Φ 2.2*9.0	21.5	< 25	24-28	40	475	ZD70
Φ 2.4-7.0	21.5	< 25	24-28	36.5	475	ZD70
Φ 2.4*8.0	21.5	< 25	26-30	42	570	ZD80
Φ 2.4*9.0	21.5	< 25	28-32	47	570	ZD80
Φ 2.4*10	20.3	< 25	30-35	52	630	ZD80
Φ 2.6*8.0	19.7	< 25	30-35	51	630	MBY630/JDX630
Φ 2.6*9.0	19.7	< 20	40-45	58	710	MBY630/JDX630
Φ 2.6*10	19.7	< 20	45-50	64	800	MBY710/JDX710
Φ 3.0*9.0	18.2	< 20	50-55	78	1000	MBY800/JDX800
Φ 3.0*11	18.2	< 20	55-60	95	1250	MBY800/JDX800
Φ 3.2*10	17.8	< 25	60-65	100	1400	MBY900/JDX900
Φ 3.2*11	17.8	< 25	70-80	110	1400	MBY900/JDX900
Φ 3.4*7.5	16.9	< 20	50-55	80	1000	MBY800
Φ 3.4*7.5+1.8	16.9	< 20	55-60	70	1250	MBY800
Φ 3.5*10	16.8	< 20	70-75	80	1250	JS110-A/MFY125
Φ 3.8*7.5	16.5	< 15	85-90	95	1400	MFY140
Φ 3.8*8.5	16.5	< 15	90-95	108	1400	MFY140
Φ 4.6*8.5+3.5	15	< 15	140-150	150	2800	MFY280/JS140-A
Φ 4.6*9.5+3.5	15.1	< 15	180-190	180	3550	JS150-B
Φ 4.6*10+3.5	15.1	< 15	200-210	190	3550	JS150-B

 

Raw mill pictures:

 

Rawmill manufacturing process:

  

Our service of raw mill:

• Installation and adjustment of raw mill: The Installation and adjustment of our raw mill is provided by our company. Technicist of raw mill will provided by supplier for buyer to assist the work such as weding connecion of shell body ,equipment installation, adjustment, training etc.
• Quality of guarantee of symons cone crusher : Three-guarantees of symons cone crusher and warrantly period id one year.
• Technical support of symons cone crusher is provided from the beginning to the end.

 

 

  

How about the quality of your raw mill?

• Our raw mill is manufactured strictly according national and international standard.
• We take a test on every raw mill before delivery.

 

How about the after-sale service of your company?

• Our engineer is aviliable to installation raw mill overseas.
• The guarantee period of our raw mill is one year.