Anticorrosive pressure transmitter transducer sensor
Description:
Corrosion-resistant ceramic piezoresistive pressure sensor chip, high acid and alkali-resistant high-density polymer materials are corrosion resistant cables, soaked in 37% HCL hydrochloric acid test for two years no anomalies, mainly used for water disinfection with chlorine, chemicals, batteries and other media measurement and control equipment for pressure acid, alkali and other strong corrosive industry, as well as food hygiene, medical and other industries.
Description:
Corrosion-resistant ceramic piezoresistive pressure sensor chip, high acid and alkali-resistant high-density polymer materials are corrosion resistant cables, soaked in 37% HCL hydrochloric acid test for two years no anomalies, mainly used for water disinfection with chlorine, chemicals, batteries and other media measurement and control equipment for pressure acid, alkali and other strong corrosive industry, as well as food hygiene, medical and other industries.
The sensors are usually also known as: corrosion resistance pressure sensors, corrosion-resistant pressure transmitter, the pressure sensor corrosion, corrosion pressure sensor, sulfuric acid pressure sensors, pressure sensors hydrochloric acid, sulfuric acid pressure transmitter, pressure transmitter hydrochloride.
Parameters:
| Measure range | -100KPa~0~10KPa~100Mpa |
| Pressure type | gauge pressure, absolute pressure |
| Power supply | 24VDC, 12VDC |
| Output signal | 4-20mA, 1-5V, 0-5V |
| Temperature compensation | -10~70℃ |
| Working temperature | -20~85℃ |
| Storage temperature | -40~125℃ |
| Zero temperature drift | ±1.5%FS |
| Sensitivity temperature drift | ±1.5%FS |
| Overload | 150%FS |
| Mechanical vibration | 20g(20-5000HZ) |
| Accuracy | ± 0.5%FS ± 0.25%FS |
| Response time | ≤1ms(Up to 90%FS) |
| Load resistance | ≤(U-15)/0.02Ω |
| Material | Stainless steel case; internal 316L sensor |
| Media compatible | Media compatible with 316L stainless steel |
| Protection grade | IP65 |
