vacuum sensor pressure sensor Eja430a
USD $200 - $900 /Unit
Min.Order:1 Unit
Xi'an Yunyi Instrument Co., Ltd.
Eja430a vacuum sensor pressure sensor
Description of vacuum sensor pressure sensor :
vacuum sensor pressure sensor can be used to measure liquid, gas, or steam pressure. It outputs a 4 to 20 mA DC signal corresponding to the measured gauge pressure. Model EJA430A also features remote setup and monitoring through communications with the BRAIN™ terminal and CENTUM CS™ or XL™ or HART® 275 host.
Specifications of vacuum sensor pressure sensor :
| EJA430A Gauge Pressure Transmitter | |||
A Capsule | B Capsule | |||
Range | -0.1 to 3 MPa | -0.1 to 14 MPa | ||
Span | 0.03 to 3 MPa | 0.14 to 14 MPa | ||
Accuracy | ±0.065% | ±0.065% | ||
Degrees of protection | IP67, NEMA 4X, and JIS C0920 immersion proof | |||
Certificates | FM, CENELEC ATEX, CSA, IECEx | |||
Output | 4 to 20 mA DC or FOUNDATION™ fieldbus or PROFIBUS PA 2-wire system with digital communication | |||
Supply voltage | BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) | |||
Ambient temperature | -40 to 85 deg C (-40 to 185 deg F) (general use type) | |||
Process temperature | -40 to 120 deg C (-40 to 248 deg F) (general use type) | |||
Maximum overpressure | 4.5 MPa (645 psig) | 21 MPa (3000 psig) | ||
Mounting | 2-inch pipe mounting | |||
Wetted parts material | Capsule | SUS316L(Diaphragm material is Hastelloy C-276), | ||
Cover flange | SUS316, Hastelloy C-276, Monel | |||
Housing | Cast aluminum alloy or SUS316 equivalent stainless steel (optional) |