multielement fast analyzer
USD $1,000 - $3,000 /Unit
Min.Order:1 Unit
Xi'an Yunyi Instrument Co., Ltd.
Multielement fast analyzer
Description of multielement fast analyzer :
Multielement fast analyzer (silicate chemical composition fast analyzer) is based on photometric analysis principle of development, using a unique linear scaling and increase the sensitivity of the method, solves the traditional photometry analysis deviates from the linear component content high, the problem of poor sensitivity analysis of low components content. Rapid analysis implements a wide range of high accuracy. Are initiated at home and abroad, the analysis method, in the field of silicate system analysis has significant advantages, particularly suitable for ceramic, refractory, cement, glass, geology, nonmetallic magnetic moment is produced, etc. The product in the colleges and universities, research institutes, factories and mines enterprises has been widely applied, has received the good effect, and has set up a enter the international market.
Technical parameters of multielement fast analyzer :
1. Measurement elements and scope: SiO2 0.2-99% Al2O3 0.2-99% Fe2O3 0.1-15% TiO2 0.1- 15% CaO 0.1- 60% MgO 0.1-40% K2O 0.1-15% Na2O 0.1-15% Li2O 0.1-15% ZrO2 0.1-99%.
2. accuracy: The analysis precision of each element to reach or exceed the national standard analytical methods specified in the margin of error.
3. velocity: Claim amount to 2 to 3 hours to complete the SiO2, Al2O3, Fe2O3, TiO2, CaO, MgO style, K2O, Na2O full analysis.
4. Sampling channels: 2
5. The test sample number: 10
6. Measuring time: 2-3 hours to complete the regular eight elements analysis of the whole
7. Test scope: silicon, aluminum, iron, titanium, calcium, magnesium, potassium, sodium, lithium, zirconium.
8. Accuracy: reach or exceed the national standard analysis method specified in the margin of error. Ceramic materials (GB/T4734, refractory (GB/T6900)
9. Scope of application: ceramics, refractory material, glass, cement and other industries, is used to detect the chemical composition of raw materials and finished products
10. Power supply voltage: 220, 50 (V/HZ)