CONFIGURATION OVERVIEW
FUNCTION DESCRIpTION
Cable and Antenna Analyzer, 2 MHz to 4/6 GHz Characterizes cable and antenna systems with return loss, cable loss, VSWR,
distance-to-fault measurements. Also includes 1-port phase and Smith chart
displays. Offers faster than 1 ms/data point sweep speed and a dual display.
Spectrum Analyzer, 100 kHz to 4/6 GHz Locates and identifies various signals over a wide frequency range. Detect
signals as low as -152 dBm with phase noise better than -100 dBc/Hz.
2-port Transmission Measurement (Option 21) Provides high and low power settings for both TMA gain and antenna-antenna
isolation measurements. Offers better than 80 dB dynamic range.
Bias Tee (Option 10) Provides built-in 32 V bias tee that can be turned on as needed, and which
eliminates the need to carry an external supply.
High Accuracy Power Meter (Option 19) Connects high accuracy 4, 6, 8, 18, and 26 GHz USB power sensors with better
than ± 0.16 dB accuracy.
Power Meter (Option 29) Makes channelized transmitter power measurements.
Interference Analyzer (Option 25) Includes the popular spectrogram display for monitoring intermittent signals
over time. Pin point the interfering source with on screen interference mapping.
Channel Scanner (Option 27) Measures the power of multiple transmitted signals.
Coverage Mapping (Option 431) Outdoor and indoor coverage mapping for RSSI and ACPR measurements.
CW Signal Generator (Option 28)
Includes CW source to test low noise amplifiers, repeaters.  
(This requires an external CW generator kit.)
GPS Receiver (Option 31)
Provides location and UTC time information. Also improves the accuracy 
of the reference oscillator.
Gated Sweep (Option 90)
Views pulsed or burst signals such as WiMAX, GSM, and TD-SCDMA only
when they are on.
AM/FM/PM Analyzer (Option 509)
Analyzes AM/FM/PM signals and measures FM/PM deviation, AM depth, SINAD,
Total Harmonic Distortion and much more.
PIM Analyzer (Option 0419) The PIM Analyzer measures the 3rd, 5th, or 7th

order intermodulation products  
in the receive band of two high power tones generated by the 40 Watt PIM Master.
Ethernet Connectivity ( Option 411) Provides the ability to operate automated testing from remote PC, or conversely,
to upload data from field test to the PC. Remote access control is  also provided
through Master Software Tools.