Japan Fujikura 70R Ribbon fusion splicer &FUJIKURA FSM-70R splicing machine WITH CT-30 cleaver
USD $9,000 - $9,200 /Set
Min.Order:1 Set
brand new Sumitomo TYPE-81C fusion splicer & USA COMWAY C10 splicing machine in stock
splicing machine Fujikura FSM-80S Fusion Splicer with CT-30 cleaver and btr-08 battery price
USA COMWAY C10 Fusion Splicer equal to Sumitomo type-81c /type-81c/type-q101 fusion splicer
Japan splicing machine Fujikura FSM-80S /FSM-70S /FSM-70R Fusion Splicer in promotion
Japan Fujikura 70R Ribbon fusion splicer &FUJIKURA FSM-70R splicing machine WITH CT-30 cleaver
-FSM-70R mass fiber splicing machine
-FSM-80S single core fusion splicer
Fujikura FSM-70R Ribbon Fusion splicer /splicing machine
Hot product! In stock!
Fujikura 70R Fusion Splicer
The Fujikura 70R is equipped with a precision, ixed v-groove for splicing single ibers
or ribbon iber up to 12 ibers. Incorporating the proven ruggedized features pioneered
by Fujikura, the 70R has added automated and enhanced user control features to
increase splicing eficiency. A user programmable, automated wind protector expedites
the splicing process by automatically closing to initiate the splice process, and opening
upon splice completion. A new auto-start “clamshell design” tube heater applies heat
to both sides of the splice protection sleeve resulting in a 40-second shrink time for
12-iber ribbon. The result is a total splice process time of approximately 55 seconds!
Ruggedness and durability are greatly enhanced by a mirror-less optical system and
"severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks.
An innovative transit case doubles as a built-in or mobile workstation and makes
splicing easier than ever before.
Features
* Automated and programmable wind protector
* 40-second automated tube heater
* Fully ruggedized for shock, dust and moisture
* Li-ion battery with 110 splices/shrinks per charge
* On-board training and support videos
* Internet software upgrades
* Multi-function transit case with integrated workstation
Our main products as below:
1. FUSION SPLICER:
COMWAY (C10, C8 )
Sumitomo (Type-81C/66);
Fujikura (FSM-80S/60S/60R/70R);
Furukawa Fitel S178A;
2.OTDR:
EXFO (FTB-1/AXS-110/MAX-710B/715B/720B/730B/ FTB-200/FTB-500);
JDSU (MTS-2000/4000/6000/8000);
YOKOGAWA (AQ7275)
3. POWER METER (PPM-350c, FPM-300, HSV300-P);
LIGHT SOURCE (FLS-300, HSV300-L);
VFL (FLS-241, HSV-321);
Multi Loss tester (FOT-930, FOT-302)
4. Anritsu site master S331D, S331L, S331E, S332E.
5. Fiber cleaver (CT-30A/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc..
7.Maintainance and repair, calibration service for the EXFO, Sumitomo, Fujikura, Anritsu.
Any interest, pls add my skype : honserv or Mobile / Viber /Whatsapp :008613728095480!