fujikura 70s fusion splicer kit w ct30a
USD $7,500 - $8,500 /Set
Min.Order:1 Set
Tel:+86-755-36934393
Fax: 0086-755-33503470
Website: www..hk
Skype: kitty.hsv
The FSM-70S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 70S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.
Applicable fibres | SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others |
Fibre Count | Single |
Cladding diameter | 80 to 150μm |
Coating diameter | 100 to 1000μm |
Fibre cleaved length | 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900 |
Actual average splice loss | 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. |
Splice time | 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode |
Return loss | 60dB or greater |
Splicing modes | 100 splicer modes are available |
Splice loss estimate | Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate. |
Attenuation splice function | Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator |
Storage of splice result | The last 2000 results to be stored in the internal memory. |
Magnification | X / Y (300X magnification), or both X and Y simultaneously (160X magnification) |
Viewing method | By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor |
Tension test | 1.96 to 2.25N |
Operating condition | 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively. |
Tube heater | Built-in auto-start tube heater with 10 heating modes and up to 20 for reference |
Tube heat time | 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available |
Applicable protection sleeve length | 60mm, 40mm and a series of micro sleeves. |
No. of splice/heating with battery | 200 times of splicing and heat shrinking under with BTR-09 |
Power supply | Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09 |
Terminals | USB2.0 ( Mini-B) for data and video signal transfer to PC. |
Wind protection | Up to 15m/s wind velocity |
Dimensions | 146(W) x 159(D) x 150(H) mm Including wind protector, monitor, and rubber protector Excluding rubber foot |
Weight | 2.5 kg, with ADC-18 AC adaptor 2.7 kg, with BTR-09 battery |
Electrode life | 3000 arc-discharges |
Item | Description | Model No. | Qty |
1 | Fusion Splicer | 70S with CLAMP-S70A | 1 pc |
2 | AC adaptor/battery charger | ADC-18 | 1 pc |
3 | AC power cord | ACC-XX | 1 pc |
4 | Spare Electrodes | ELCT2-20A | 1 pair |
5 | Cleaver | CT-30A | 1 pc |
6 | Battery Pack | BTR-09 | 1 pc |
7 | USB cable | USB-01 | 1 pc |
8 | Quick reference guide | M-80S/19S-E | 1 pc |
9 | Warning and cautions | W-70-E | 1 pc |
10 | Instruction Manual | M-70 | 1 pc |
11 | Alcohol Pot | AP-01 | 1 pc |
12 | Battery charge cord | DCC-18 | 1 pc |
13 | Carrying Case | CC-30 | 1 pc |
14 | Screw Driver | SD-01 | 1pc |
Our main products:
1. Fusion splicer: Sumitomo (type-66/-81c/z1c)
Fujikura (fsm-60s/60r/70r/80s)
Fitel (S178A/S199M12)
Chinese fusion splicer (HSV6000)
2. OTDR: EXFO (axs-100/110,ftb-1/200/500),
JDSU (mts-2000/4000/6000/8000)
YOKOGAWA (AQ7275)
Ethernet tester: AXS-200/610/630/635/805/850/855)
3. Power meter (PPM-350c, FPM-300, HSV300P)
Light source (fls-300, HSV-300L)
VFL (fls-240, HSV-321)
Multi Loss tester (FOT-930, FOT-302)
4. Anritsu site master S331L, S331E, S332E.
5. Fiber cleaver (CT-30(A)/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, splice protector, adapter, closure, pigtail, optical switch, patch panel, etc..
7. Maintenance and repair, calibration service for the EXFO, Sumitomo, Fujikura, Anritsu.
Be free to contact kitty if any questions,
You can also log onto for more information!