50~300m fiberglass cable rolling guide,fiberglass cable rods, 5mm, 10mm, 15mm
USD $60 - $500 /Set
Min.Order:1 Set
50~300M fiberglass cable rolling guide,fiberglass cable rods, 5mm, 10mm, 15mm
Nancy Liu
Viber / Tel : +86 15118174252
skype: nancy.hsv
Glass fibre cable rod technical specifications:
Glass fiber rod diameter | Φ4.5-16mm |
Length | 1-500m |
Working temperature | -40+80 |
Min Bend Radius | 295mm |
Breaking tension | 4.5T |
Glassfiber density | 150g/m |
Technical data of fibre glass cable rod:
1. Glass reinforced composite core:
general properties
Property | value |
keinforcement | E-glass fiber |
glass content of inner part | 75-80% |
material of pulling rod | epoxy fiber glass(inner) high density polyethylene(outer) |
density | >1.9gr/cm3 |
diameter tolerance | +/-0.10mm |
work situation temperature | -40°C to +80°C |
Mechanical preperties
property | value |
minimum pullling strength | 4000 N+/-5% |
tensile modulus | >30000Mpa |
consistency of rod | 150gr/m +/-5% |
flexural modulus | >30000M pa |
elongation at break | 2.5-3% |
2. Polyethylene cover
Material:
Medium density polyethylene resin for the insulating and jacketing of telecommunications cables.
property | value |
tensile strength | >15N/mm2 |
environmental stress & crack resistance | >1000 hr. |
heat stability | OK. |
carbon black | OK. |
1. FUSION SPLICER: Comway C10; Sumitomo (T-81C); Fujikura (FSM-80S/70S/70R); Fitel S178A; INNO IFS 10 2.OTDR: EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500); JDSU (MTS-2000/4000/6000/8000); YOKOGAWA (AQ1200/AQ7275)
3. POWER METER (PPM-350C, FPM-300, HSV-300P); LIGHT SOURCE (FLS-300, HSV-300L); VFL (FLS-241, HSV-321); Multi Loss tester (FOT-930, FOT-302)
4. Anritsu site master S331D, S331L, S331E, S332E.
5. Fiber cleaver (CT-30A/CT-30/CT-05/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc..
7.Maintainance and repair, calibration service for the EXFO, JDSU, Sumitomo, Fujikura, Anritsu