Specifications

Product: NK-ZB1530
Voltage: 220V 50Hz/60Hz
Frequency: 20K

                                                    Ultrasonic Non-woven Folding and Cutting Machine

Ultrasonic Non-woven Folding and Cutting Machine which uses of the ultrasonic sewing technology, combine with the PLC procedure controller, can finish the edges fold and cut processing with the set length and width with one machine, which can increase the productivity and improve economic performance.

 

Specification:

Product: NK-ZB1530

Voltage: 220V 50Hz/60Hz

Frequency: 20K

Dimension: 2550X1700X1500

Weights: 300kgs

Min Cutting Length: 20mm

Max Cutting Length: 2000mm

 

 

Structure of this Machine:

 

1. Edge Finder Electronic Eye
2. Inductive Switch
3. Color Wedge Magic Eye
4. Electronic Box
5. Touch Screen
6. Ultrasonic Mould Speed Adjust 1
7. Ultrasonic Mould Speed Adjust 2
8. Ultrasonic Generator Electronic Box
9. Oil Point

10.  Edge Finder Control Box

11.  Oil Point

12.  Oil Hole

13.Oil Hole

 

Edge Finder Control Panel

 

Power Indicators of the Edge Finder Control Panel

 

1. Limiter 1

2. Single Electronic Eye

3. Limiter 2

4. Double Electronic Eye (No Use in this Machine)

5. Positive Direction

6. Opposite Direction (Better use this one)

7. Manual Operation (when adjust firstly use this)

8. Auto Operation (use when the machine is working)

9. Center Justify (No Use in this Machine)

10. Move Left (Manual)

11. Move Right (Manual)

 

1.”SETTING” Button, adjust the speed of the motor which can decide the working quality of the edge finder, “0” is the max number, the fastest speed; “9” is the minimum number, lowest speed.

2. Display of the “SETTING” number

3. “SINGLE/ DOUBLE ELECTRONIC EYE” Button, for this machine we only have one Electronic Eye(Edge Finder)

4. “POSITIVE/OPPOSITE DIRECTION SETTING” Button, pls better use “OPPOSITE” one.

5. “MANUAL/AUTO SETTING” Button, can set here to manual or auto finding of the edges by press this button, when you are adjusting & finding the best position firstly, you need to use the “MANAUL” one ,when the machine is working, you need to use the “AUTO” one.