Surge Arrester, buy Low voltage Surge arrestor without gaps on China Suppliers Mobile

Product Details

specification

1. About Surge Arrester

YONGDE Surge Arresters can be applied to a variety of systems including substation equipment,

railway power system and power distribution units ranging from 0.28kV to 500kV systems.
These surge arresters demonstrate excellent protection properties. Our surge arresters incorporate

non-linear resistor ZnO elements with superior non-linear current- voltage characteristics,

high quality and reliability. Metal oxide type surge arresters offer such special features
inherent in the gapless structure, such as a quick response to surge voltage,

high energy dissipation capability, safe operation, compactness / lightweight and freedom from pollution.

0.28~500 KV Product's Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column,

with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size

and light in weight.

2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large

in flow capacity.

3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops,

the product can be applied to the complete cabinet installation,

which can reduce the designing size of cabinet.

4. Products with detachment device can provide signals for quitting operation when failure occurs,

avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level

in heavy pollution areas.

2. Surge Arrester Technical Parameters

Type	YH5W5-15/40	4/10µS High current impulse kA	65
Rated voltage---------kV	15	Lightning impulse withstand kV	95
MOCV ----------------kV	12.7	Power frequency voltage withstand(dry/wet)kV	28
Nominal Current-------kV	5	0.1S TOV--------------kV	18
Residual voltage of steep impulse----at 5kA(kV)	43.5	1S TOV----------------kV	17.25
8/20µS Residual voltage of lightning impulse current kV(Peak value)-----at 5kA(kV)	40	10S TOV---------------kV	16.5
Residual voltage of switching impulse current kV (peak value)----at 1kA (kV)	/	1200S TOV-------------kV	15
1mA D.C reference voltage (kV)	21.2	Creepage distance ----mm	500
Line discharge level	1	Material employed in series non-linear resistor	Zinc Oxide
2mS long duration impulse current A	250	Material of housing	silicon rubber

3. Surge Arrester Working Condition

Environment temperature: -40--+40 degree

altitude:<1000m

48HZ<Rated frequency<62HZ

Power frequency voltage should not be more than continuous running voltage

Max wind speed should be less than 35m/s

Earthquake intensity should be less than 7 degree

If used in contamination area, should be noted in advance.

4. Surge Arrester detail picture

FAQ

Production Lead Time & Quality Guarantee:

1. Sample deliery time is about 2-3 days;

big order quantity is about 30-35 days after we receive 30%~50% deposit from you.

Generally, it takes 4 working days by DHL/UPS, and 7-10 days by EMS.

2. 12 months' warranty period. 20 years’ quality guarantee period
With ISO9001:2008approvals.

Customer Services:

Our salesmen will reply your inquiry within 24 hours. Any order is welcome. If you like to be our agent in your country, we can give you any support on the technique & other aspects.